Kit of 4 aviation brake hoses (Stainless steel braided) for disc brake - Small brake assembly (Ø 3/8"-24UNF)

• Renault OE ref: 7700519170 / 7700638870 /7700676150 / 7701348231 /7701616841
• OE Simca Ref: 40231D

• Plate surround fixing clip not supplied see Ref AVP49105

• Distance between two pulley mounting screws: 37mm
• Pulley mounting using 3 x M8 screws (Not supplied)
• The heater outlets can be plugged using two 16mm diameter rubber plugs and one 10mm diameter plug
• Water pump sold with water pump gasket, plate gasket, and plate

These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.

With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.

Features:

• Mounting eye width: 21mm
• Lower mounting eye inner diameter: Ø 9mm
• The internal adjustment allows you to modify the rebound damping of the shock absorber.
• Shock absorbers delivered at minimum setting (fully open, i.e., softest)
• Shock absorbers sold in pairs

Suitable for:

• R8.G (R1134 / R1135) from 10/1964 to 1974
• Alpine A110 (All models): 1100cc / 1300cc / 1600cc / SX (With Alpine A310 rear axle)
• Alpine GT4 / Matradjet

Detailed description of Koni shock absorbers, see below

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Can also fit on Caravelle and Floride S trumpets

Convient pour:

• R8 / A110: Frein Arrière (Montage Type gros frein)
• A310.4 (Tous modèles) : Frein Arrière
• A310.6 (Avant 1980) : Frein Arrière