3-piece clutch kit (Disc, mechanism and thrust bearing) - Ø 215mm - Engine 1600cm³

Suitable for:

• 4CV: Drum brake (From 06/1953 until the end of production)
• Alpine A106: Drum brake
• Dauphine (All models): Disc brake
• Caravelle / Floride: Disc brake
• R10 / R8 (All models): Disc brake
• R12G and R17 Gordini: Disc brake
• Alpine A110 and GT4: Disc brake

• TRW paste is used for the repair, assembly, and preservation of hydraulic brake components, particularly brake calipers, which must be reassembled using special greases.
• Compatible with all brake fluids for assembling seals and Everything that comes into contact with brake fluid: master cylinder, wheel cylinder.

Synchro Characteristics:

• • Outer cone with angle (A):6°40'
  • The outer friction faces or sectors (x15) are different: x3 small and x2 large
  • Synchro with a lug on the face opposite the main lugs of the synchro (See diagram)
  • Renault OE Ref: 7700557051

Suitable for 2nd gear synchros for the following gearboxes:

• • • 330 Gearbox: 330- ...
    • Box 336: 336- ...
    • Box 352: 352-30 / 352-31 / 352-33 / ...
    • Box 353: 353- ...
    • Box 364: 364- ...
    • Box 365: 365-05 / 365-10 / 365-14 / 365-20 / 365-24 / 365-33 / ...
    • Box 385: 385-10 ...
    • Box 395: 395-02 / 395-03 ...

We recommend carefully disassembling and identifying the synchros (9° or 6°40' angle, friction sector, etc.) in each gearbox, as we have observed some mix-ups.

The gearbox numbers on the identification plate are not the most reliable indicators for identification.

• 3-tube pump: Inlet - Outlet - Return
• Sold without seal and without thermal wedge

• Wheel-side bowl diameter: Ø 82mm
• Drive shaft diameter: Ø 25mm