 / A310.4 (2nd model - From chassis no. 635) - Ref 6000003308&media=https://www.arnaudventouxpieces.com/1340-large_default/clutch-slave-cylinder-o-254mm-a1101600-sx-sc-a3104.jpg){kind=link}
- Supplied with 2 banjo bolts: M12x100 and 4 copper gaskets.
Compatible with the following vehicles:
- A310.4: From chassis no. 635 to end of series (With 2nd assembly clutch slave cylinder)
- A310 V6: All models
In stock
Clutch slave cylinder Ø 25.4mm - A110.1600 (SX and SC) / A310.4 (2nd model - From chassis no. 635) - Ref 6000003308
Reference:
6115
- Fuel banjo bolt diameter: M12x100
Suitable for vehicles:
- A110 1600 SX (VD) and SC (VH)
- A310.4: From chassis no. 635 to end of series (2nd model)
€134.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Customers who bought this product also bought:
Suitable for:
- R8 / A110: Front Brake (Big Brake Assembly)
- R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
- R12 (All models) / R15TL: Front Brake
- R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake
- A310.4 (n°910 at the end of the series): Front Brake
- A310 V6 (Before 1980): Front Brake
In stock
- 4 spark plug wires + 1 coil wire
- Straight terminals on coil
- Length of coil cable: 61cm
- Length of 2 spark plug cables: 26.5cm
- Length of 2 spark plug cables: 36.5cm
- We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), they do not have interference protection.
- If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.
In stock
A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.
- For fitting a belt width: 13mm
In stock
- 4 spark plug wires + 1 coil wire
- 90° angled coil terminals
- Length of coil cable: 61cm
- Length of 2 spark plug wires: 26.5cm
- Length of 2 spark plug wires: 36.5cm
- We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), which means they are not protected against interference.
- If the vehicle is equipped with electronic accessories If you have sensitive equipment, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.
In stock
A single 5.20m reel is useful for making both sides of the car (right and left).
In stock
Kit of 2 rubber heating hoses "Sofica" under the dashboard - Ref 6000000556 + 6000000561 +6000000562
- A hose needs to be cut at the location of the heating tap.
In stock
In stock
- Overall length: 57.5 cm
- Sheath length: 22.5 cm
- Cable length: 45 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock