Clutch disc - Ø 215mm (21 splines) - ENgine 1600cm³

Delivery in France only

• Recommended paint for decorating and protecting the exhaust manifold
• Resistant up to 600°C

Features:

• Mounting hub 4 holes - Centering Ø 87mm
• Non-ventilated discs

Suitable for:

• A110.SC / SI: Rear disc
• A310.4 (All models): Rear disc

Bearing Dimensions:

• Dimension: Repair Dimension (+0.25)
• Junnel Diameter (A): Ø 54.55mm
• Housing Diameter (B): Ø 58.75mm
• Bearing Width (C): 20.50mm
• Bearing Thickness (D): 2.07mm
• Smooth, lug-type bearings with grease holes (x5) and grooves (x5)
• Bearing Material: Bi-metal

• Special Premium Quality graphite for clutch release bearings
• Important: The release bearing clamping screw must be placed on the side opposite the fork
• It is possible to keep the release bearing and replace only the graphite ring if worn.
• Depending on the diameter of the return spring, it may be necessary to re-drill the release bearing mounting.
• It is recommended to soak the release bearing in warm engine oil and then wipe it dry before installation to avoid squeaking noises

Thread Ø3/4" - 16UNF