Gear selector oil seal - Box 352 / 365-00 / 365-10 - Ø 13x26x9mm - Ref 7700532196

• Oil-filled shock absorber with original setting (Super Comfort Series)
• Supplied with silentbloc and mounting washers

Suitable for:

• R12 (All models from 1969 to 1981) and R12G
• R15 (All models from 1971 to 1981)
• R17 (All models from 1971 to 1981) and R17G

Bearing Dimensions:

• Dimension: Repair Dimension (+0.25)
• Crankpin Diameter (A): Ø 47.75mm
• Housing Diameter (B): Ø 51.60mm
• Bearing Width (C): 21.75mm
• Bearing Thickness (D): 1.89mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal

Suitable for:

• R4 / 4L: Front Brake
• R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
• R8: Big Brake Installation: Front Brake
• R12 (All models): Front Brake
• R15 / R16 / R17 (All models): Front Brake
• A110: Big Brake Installation: Front Brake
• A310.4 / A310 V6 (Pre-1980): Front Brake
• Alpine GTA (V6 GT and V6 Turbo): Front Brake

Brake pads with a retaining stop (B in the diagram) must be installed with this stop positioned towards front (direction of wheel rotation)

• This ignition harness consists of4 spark plug wires and1 coil wire.
• We would like to point out that our spark plug wires are made with 7 mm diameter silicone wires, black in color, with a standard copper core (wire material), which means they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 48.00mm
• Housing Diameter (B): Ø 51.60mm
• Bearing Width (C): 21.75mm
• Bearing Thickness (D): 1.77mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal