Out of stock
Pair of aluminum intake pipes for Weber 45DCOE carburetor (Mounting without flexible or rigid flanges)
Reference:
8802
- Center distance between carburetor and intake pipe : 110mm and 70mm
- Flanges with tapping for a vacuum
- Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)
€474.00
(tax incl.)
You may also like
- Need 1 AVP6816 gasket and 3 AVP6815 gaskets to equip an engine
In stock
- Need 3 AVP6815 gaskets and 1 AVP6816 gasket to equip one engine
In stock
In stock
In stock
Customers who bought this product also bought:
Fan trigger temperature 88°C
Fan stop temperature 79°C
In stock
In stock
- Air intake trumpet/trumpet filters for WEBER 45DCOE carburetor
- Mesh filters made of two layers of stainless steel mesh, with an intermediate filter layer ensuring optimal engine protection
- Easily washable and removable
- Suitable for trumpets with an outer flange diameter between Ø 60mm and 70mm
- Filter inner diameter: Ø 58mm
- Filter outer diameter: Ø 80mm
- The filter length when installed on a 63mm trumpet is 82mm (overall)
- Can be mounted on the entire assembly cones from the AVP catalog
In stock
In stock
- This kit contains an M9 adjustment screw nut and an M8 nut
- To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
- A square symbol indicates a square seal, while a circle symbol indicates a round seal.
- It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
- We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
- It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.
In stock
&media=https://www.arnaudventouxpieces.com/7814-large_default/set-of-2-aluminum-pipes-for-45dcoe-carburetor-without-pair-of-flanges.jpg){kind=link}
Suitable for:
- R4 / 4L: Front Brake
- R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
- R8: Big Brake Installation: Front Brake
- R12 (All models): Front Brake
- R15 / R16 / R17 (All models): Front Brake
- A110: Big Brake Installation: Front Brake
- A310.4 / A310 V6 (Pre-1980): Front Brake
- Alpine GTA (V6 GT and V6 Turbo): Front Brake
Brake pads with a retaining stop (B in the diagram) must be installed with this stop positioned towards front (direction of wheel rotation)
In stock
In stock