Complete throttle control for Weber 45DCOE carburetor - 1600cm³ engine (VB / VC)

Valve with high keyway

The entire kit is made up of 3/8" -24UNF fittings

This kit is made up of the following copper pipes:

- from the brake master cylinder to the Front Right wheel

- from the brake master cylinder to the Front Left wheel

- from the brake master cylinder to the distributor or rear three-way connection

- from the three-way connection or rear distributor to the right rear wheel

- from the three-way connection or rear distributor to the left rear wheel

• Ball Ø 8mm / Stem M5
• Adjustment range between 65mm and 90mm

• Intake manifold mounting distance: 70mm and 110mm
• Carburetor mounting distance: 110mm and 70mm
• Flange thickness: 19.3mm
• Pipes diameter: Ø 45mm
• Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting studs (x16)

These rigid aluminum flanges replace the original "flexible" rubber flanges, which tear with wear.

From the year 1984

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 48.00mm
• Housing Diameter (B): Ø 51.60mm
• Bearing Width (C): 21.75mm
• Bearing Thickness (D): 1.77mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal