Gasket set for 2 carburettors with needles 1.5 - Weber 40DCOM

• Paper gasket for inspection hatch for cover ref 48120 for WEBER 40DCOE and 45DCOE
• Number 41 on exploded view

• Stem Length: 38mm
• Diaphragm hole spacing: 27mm

Segment Characteristics:

• • Segment Diameter:Ø 74.50mm
  • Thickness of Upper Segments (Fire-resistant): 1.75mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.or the values ​​provided in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.

• Fitting for flat wiper arm width 6mm

Delivery in France only

• Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
• DOT 5 approved (not to be confused with DOT 5.1)

Directions for use:

• Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.