Gasket between pipe and flange of Weber 40DCOE carburettor

• Replaces Ducellier kit 582116

Suitable for:

• R8 (All models) / Caravelle / Floride S
• A110 (All models) / Alpine GT4
• Matradjet

This adjustable steering kit replaces the original "Fork" type steering rods.

To install the adjustable rods, it is necessary to remove the silent block of the rack eye and replace the steering bellows with the specific bellows AVP4620 (Included in the kit).

• Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising.
• Valve with low keyway

Bearing Dimensions:

• Dimension: Repair Dimension (+0.20)
• Journal Diameter (A): Ø 51.77mm
• Housing Diameter (B): Ø 55.88mm
• Bearing Width (C): 18.68mm
• Bearing Width (C): 24.68mm
• Bearing Thickness (D): 2.02mm
• Smooth, lug-type bearings with grease holes (x7) and grooves (x7)
• Bearing material:Bi-metal

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.