Click for more products.
No products were found.
Click for more products.
No products were found.
×
Filter for WEBER DCOE 40 and DCOE 45 carburetor - 1
Filter for WEBER DCOE 40 and DCOE 45 carburetor - 2
Filter for WEBER DCOE 40 and DCOE 45 carburetor - 1
Filter for WEBER DCOE 40 and DCOE 45 carburetor - 2
Filter for WEBER DCOE 40 and DCOE 45 carburetor - 1
Filter for WEBER DCOE 40 and DCOE 45 carburetor - 2

Filter for WEBER DCOE 40 and DCOE 45 carburetor

Reference:
48033
  • Suitable for WEBER 40DCOE and 45DCOE carburetors
  • Requires 1 part per carburetor
  • Number 3 on exploded view
  • Compatible with other WEBER carburetors, see below
Read moreShow less
€5.80 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Description

Below are the various WEBER carburetors compatible with the AVP48033 reference:

Carburetor Inlet Diameter

Type or model of Carburetor
from Ø22 to Ø28

24 IMB, 24/32 DDC, 26 IM, 26 IMB, 26 OC, 26/34 DHSA, 28 IMB, 28/30 DFTH, 28/30 DGV, 28/30 DHTA, 28 ICP, 28/36 DDE, 28/36 DHSA, 28/36 DLE,

28/36 DLEA, 28/36 DM, 28/36 DMA, 28/36 DMD
from Ø30 to Ø32

28/36 DLEA, 28/36 DM, 28/36 DMA, 28/36 DMD, 30 DIC, 30 DICA, 30 DMTE, 30 DMTR, 30 IBA, 30 ICF, 30/32 DHTA, 30/32 DMTE, 30/32 DMTR, 32 IBA, 32 ICB, 32 ICH,

32 ICR, 32 ICT, 32 DAF, 32 DAR, 32 DAT, 32 DATR, 32 DATRA, 32 DFB, 32 DFD, 32 DFM - DFE, 32 DG, 32 DGAS, 32 DGAV, 32 DGR, 32 DGV, 32 DHS, 32 DHSA, 32 DIF, 32 DIR,

32 DMSA, 32 DMTR, 32 IBSA, 32 IBSH, 32 ICS, 32 OF, 32/34 DMTL, 32/34 DMTR, 32/36 DAC, 32/36 DFAV, 32/36 DFV, 32/36 DGAV, 32/36 DGV

from Ø34 to Ø55

34 ADSD, 34 ADSDA, 34 DAT, 34 DATA, 34 DATC, 34 DATR, 34 DATRA, 34 DCHD, 34 DCHE, 34 DCS, 34 DGAS, 34 DHS, 34 DMS, 34 DMTR,

34 ICH, 34 ICR, 34 ICT, 36 DCA, 36 DCD,

36 DCNFA, ​​36 DCNV, 36 DCNVA, 36 DCNVH, 36 IDF, 38 ADLD, 38 ADS, 38 DCOE, 38 DGAR, 38 DGAS, 38 DPS, 40 DCOE 151, 40 DFA, 40 DFAV,

40 DFO, 40 IDF 70, 36 DCNF, 40 DCNF, 42 DCNF, 44 DCNF, 42 DFC, 44 IDF 71, 45 DCOE 152, 45 DFC, 48 DCO/SP, 48 DCOE, 48 IDF 6, 48 IDA, 50 DCO/SP, 55 COD/SP
Read moreShow less
Product Details
48033
You may also like
Customers who bought this product also bought:
Accelerator cable - A110 - 1300cc / V85 - 1 Accelerator cable - A110 - 1300cc / V85 - 1

  • Overall length: 245.5cm
  • Sheath length: 193.5cm
  • Cable length: 235cm

Suitable for:

  • A110.1100 (VA and VB)
  • A110.1300 (VA and VB)
  • A110.1300 VC (V85)

Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.

Reference: 6501-A
€54.00 (tax incl.)
Add to cart
In stock
Set of 4 liners and pistons Ø 75.7mm with segment and pins - R8G/A110 (1296cc) - 1 Set of 4 liners and pistons Ø 75.7mm with segment and pins - R8G/A110 (1296cc) - 1

The kits are supplied with the following components:

  • Cylinder Heads (x4)
  • Domed Pistons (x4)
  • Rings (x12)
  • Pin (x4)
  • Circle Clips (x8)

Dimensions of the various parts:

    • Cylinder Head Bore Diameter: Ø 75.7mm
    • Cylinder Head Flange or Top Diameter (D): Ø 89.75mm
    • Cylinder Head Base Diameter (A): Ø 80mm
    • Overall height including skirts of cylinder liners (C): 128mm
    • Height from top of cylinder liner to base seal area (E): 94.80mm
    • Shaft dimensions: Ø 20x63.5mm (Cirlip-free mounting)
    • Ring thickness: 1.75mm / 2mm / 4mm (Fireproof/Sealing/Scraper)
    • Base seal type: Paper gasket

Piston mounting direction: (arrow) drawn perpendicular to the axis of the piston, figure on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).

It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals. 

Reference: 4068
€496.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in