Carburetor hose - R12.TS / A110.V85

Dauphine and 4CV : Front or rear bonnet handle rubber buffer

R8: Spare wheel flap rubber buffer

This brake limiter replaces the original non-adjustable rear brake proportioning valve.

The limiter is not load-dependent (it does not vary according to the vehicle's load).

Its adjustment is manual, using the calibration screw. Adjustment can be made either statically, using brake pressure gauges and referring to the manufacturer's data, or dynamically (see description below).

Limiter specifications:

• Inlet thread (x1): 3/8-24UNF (Male cone)
• Outlet thread (x2): 3/8-24UNF (Male Taper)
• Mounting Screw Hole Diameter: Ø 8.5mm
• Limiter Adjustment Range: 5 turns
• Limiter delivered unadjusted (screw loosened): Rear brake pressure limited to maximum

To turn on a temperature warning light

Trigger temperature 115°C

• These bushings replace the original bushings; no modifications are required.

Sold with its key and protective cap