In stock
Alpine A110 V85 engine - 1289cm³ engine (Type 810 - Bore Ø73mm) (Page 2 sur 2)
Suitable for the following vehicles:
R5: See models in description
R9: See models in description
R11: See models in description
R15 / R16 / R17
R18: From 04/1978 to 02/1986
R19: See models in description
R20 (GTL / L...
In stock
Rock cover sold with its gasket: Rope gasket Ø 4mm
In stock
Rock cover sold with its gasket: Rope gasket Ø 4mm
In stock
In stock
In stock
Out of stock
Minimum insertion diameter of the plug (with its gasket) between:Ø 48.5mm and Ø 50mm
Rock cover plugwith vent hole
Plug sold with its sealing gasket (AVP 60119)
In stock
Minimum insertion diameter of the plug (with its gasket) between:Ø 48.5mm and Ø 50mm
Rock cover plugwith vent hole
Plug sold with its sealing gasket (AVP 60119)
In stock
Minimum insertion diameter of the plug (with its gasket) between:Ø 48.5mm and Ø 50mm
Rock cover plugwith vent hole
Plug sold with its sealing gasket (AVP 60119)
In stock
Cap Dimensions:
Cap Recess Diameter: Ø 32.5mm
Cap Outer Diameter: Ø 65.38mm
Metal Tab Length: 42mm
Metal Tab Width (at widest point): 13.40mm
Metal Tab Width (at narrowest point): 7mm
In stock
In stock
In stock
Pressure : 0 - 6 bar
Release pressure : 0.60 bar
Thread: M14x150
If fitting the pressure transmitter to a 1397cc R5 Alpine (R1223) engine, use extension part number: AVP5091
In stock
Cap thread: M16 x 1.5 mm
Magnetic cap with 8 mm square recess
Renault OE part numbers: 7830197000 - 7703075152 - 7903075033
Supplied without gasket.
Copper gasket part number: AVP 1108
In stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF and female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock
In stock
In stock
In stock
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2.5mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 3mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
In stock
Metric tap (ISO 6H tolerance): M6x100 (Right-hand thread)
Tap length (Overall): 66 mm
Mounting recess: 5 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
Piston diameter: Ø 53 mm (Minimum) to Ø 125 mm (Maximum)
Tool height: 75 mm
Supplied with a square tightening wrench
Ideal tool for installing pistons in the cylinder block
Out of stock
Bore diameter: Ø 55mm (Minimum) to Ø 170mm (Maximum)
Stone dimensions: 100mm
Interchangeable honing stone
Self-adjusting and tightening sanding arm with flexible drive for pneumatic or electric drills
For honing,...
In stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
Out of stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
Out of stock
In stock
Limited special offer
In stock
Sealing of engine and crankcase gaskets, flat gaskets, pipes, threaded fittings, valves, flanges, tanks, cisterns, retention tanks and all mechanical parts
Recommended for fitting old copper-type cylinder head...
In stock
Delivery in France only
Epoxy coating for the interior of the engine block.
0.5 kg of resin and hardener + 0.5 l of thinner
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9006 Aluminum Gray
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9005 BLACK
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 6005 green
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Bright Blue RAL 5005
Applicable directly with a brush or spray gun by...
In stock
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox
Resistant to 180°C
Capacity: 500ml
Color: Orange RAL 2002
Applicable directly with a brush or spray gun by diluting the paint with thinner...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Reddish brown RAL 3011
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Fire Red RAL 3000
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
In stock