R8G (Type R1135) 1296 cm³ engine

Our spare parts for the engine of your Renault 8 Gordini.

Discover here our wide selection of spare parts available to restore or maintain Renault 8 Gordini:

The 1296cm³ engine (type 688) Renault 8 Gordini 1300G (R1135)

Whether you are looking for: engine piston, liners, rings, crankshaft bearings, connecting rod bearing, side shims, engine gasket set, base gasket, rocker cover, cylinder head gasket, pinion, distribution, distribution chain, intake valve, exhaust valve, manifold gasket, crankcase, chain tensioner...At AVP Arnaud Ventoux Pièces, we have everything you need to restore your Renault 8 collection with quality components.

Read moreShow less

Home
>
Renault
>
R8 / R8S / R8G
>
R8 / R8S / R8G engine
>
R8G (Type R1135) 1296 cm³ engine

R8 / R8S / R8G engine

Purchase a gift voucher

Set of 4 liners and pistons Ø 75.7mm with segment and pins - R8G/A110 (1296cc) - 1

Set of 4 liners and pistons Ø 75.7mm with segment and pins - R8G/A110 (1296cc) - 1

Set of 4 cylinder liners and pistons Ø 75.70mm with segments and pins - R8G / A110 (1296cm³ engine - Type 812)

The kits are supplied with the following components: Cylinder Heads (x4) Domed Pistons (x4) Rings (x12) Pin (x4) Circle Clips (x8) Dimensions of the various parts: Cylinder Head Bore Diameter: Ø 75.7mm Cylinder...

Reference: 4068

€413.33

In stock

Jeux de 4 chemises seules en fonte Ø75.7mm (Moteur1296cc) - 1

Jeux de 4 chemises seules en fonte Ø75.7mm (Moteur1296cc) - 1

Jeux de 4 chemises seules en fonte Ø75.7mm (Moteur1296cc)

Sheets (x4) Sheet Dimensions: Sheet Bore Diameter: Ø 75.7mm Sheet Flange or Top Diameter (D): Ø 89.75mm Sheet Base Diameter (A): Ø 80mm Sheet Height (including skirts, overall) (C): 128mm Sheet Height to Base...

Reference: 4032

€221.67

In stock

Set of 12 segments Ø 75.7mm - 1.5Cx2x4 - 1

Set of 12 segments Ø 75.7mm - 1.5Cx2x4 - 1

Set of 12 segments Ø 75.7mm - 1.5Cx2x4mm

Segment Characteristics: Segment Diameter: Ø 75.70mm Thickness of Upper Segments (Fire-resistant): 1.5mm Thickness of Intermediate Segments (Waterproof): 2mm Low ring thickness (Scraper): 4mm It is essential to...

Reference: 40148

€77.50

In stock

Set of 12 segments Ø75.7mm - 1.75Cx2x4 - 1

Set of 12 segments Ø75.7mm - 1.75Cx2x4 - 1

Set of 12 segments Ø75.7mm - 1.75Cx2x4

Segment Characteristics: Segment Diameter: Ø 75.70mm Thickness of Upper Segments (Fire-resistant): 1.75mm Thickness of Intermediate Segments (Waterproof): 2mm Low ring thickness (Scraper):4mm It is essential to...

Reference: 4069

€98.33

In stock

Set of 4 forged pistons Ø 75.7mm with full axis segments - 1

Set of 4 forged pistons Ø 75.7mm with full axis segments - 1

Set of 4 forged pistons Ø 75.7mm with full axis segments

Reference: 4067

€600.00

In stock

Set of 4 genuine GS cast iron liners - Ø 75.7mm (1296cc engine) - 1

Set of 4 genuine GS cast iron liners - Ø 75.7mm (1296cc engine) - 1

Set of 4 genuine GS cast iron liners - Ø 75.7mm (1296cc engine)

Reference: 40147

€638.33

In stock

Set of 12 segments Ø 75.7 for forged piston (ref 4067) - 1x1.2x2.5 - 1

Set of 12 segments Ø 75.7 for forged piston (ref 4067) - 1x1.2x2.5 - 1

Set of 12 segments Ø 75.7 for forged piston (ref 4067) - 1x1.2x2.5

Segment Characteristics: Segment Diameter: Ø 75.70mm Thickness of Upper Segments (Fire-resistant): 1.00mm Thickness of Intermediate Segments (Waterproof): 1.20mm Low ring thickness (Scraper): 2.5mm It is essential...

Reference: 4074

€96.67

In stock

Base gasket for liners - 1300cc - 1

Base gasket for liners - 1300cc - 1

Base gasket for liners - 1300cc

Reference: 4064

€9.17

In stock

Set of connecting rod bearings Ø 43.98mm - STD (Original dimension) - 1

Set of connecting rod bearings Ø 43.98mm - STD (Original dimension) - 1

Connecting rod bearing set (Small bearings) Ø 43.98mm - STD (Original dimension)

Bearing Dimensions: Dimension: Original (Standard) Dimension Crankpin Diameter (A): Ø 43.98mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 20.75mm Bearing Thickness (D): 1.81mm Smooth, lug-type bearings with no...

Reference: 4048

€38.33

In stock

Set of connecting rod bearings Ø 43.73mm - Repair dimension (+0.25) - 1

Set of connecting rod bearings Ø 43.73mm - Repair dimension (+0.25) - 1

Connecting rod bearing set (Small bearings) Ø 43.73mm - Repair dimension (+0.25)

Bearing Dimensions: Dimension: Repair Dimension (+0.25) Crankpin Diameter (A): Ø 43.73mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 20.75mm Bearing Thickness (D): 1.93mm Smooth, lug-type bearings with no...

Reference: 4049

€38.33

In stock

Set of connecting rod bearings Ø 43.48mm - Repair dimension (+0.50) - 1

Set of connecting rod bearings Ø 43.48mm - Repair dimension (+0.50) - 1

Set of connecting rod bearings (Small levels) Ø 43.48mm - Repair dimension (+0.50)

Bearing Dimensions: Dimension: Repair Dimension (+0.50) Crankpin Diameter (A): Ø 43.48mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 20.75mm Bearing Thickness (D): 2.06mm Smooth, lug-type bearings with no...

Reference: 4050

€38.33

In stock

Set of crankshaft main bearings (small bearings) Ø 46mm - STD (Original dimension) - 1

Set of crankshaft main bearings (small bearings) Ø 46mm - STD (Original dimension) - 1

Crankshaft bearing set (Small bearing) Ø 46mm - STD (Original dimension)

Bearing Dimensions: Dimension: Stock dimension (Standard) Journal Diameter (A): Ø 46.00mm Housing Diameter (B): Ø 49.89mm Bearing Width (C): 24.50mm (x4) Bearing Width (C): 19.50mm (x6) Bearing Thickness (D): 1.92mm...

Reference: 4051

€38.33

In stock

Set of crankshaft main bearings (small bearings) Ø 45.75mm - Repair dimension (+0.25) - 1

Set of crankshaft main bearings (small bearings) Ø 45.75mm - Repair dimension (+0.25) - 1

Crankshaft bearing set (Small bearing) Ø 45.75mm - Repair dimension (+0.25)

Bearing Dimensions: Dimension: Repair Dimension (+0.25) Junnel Diameter (A): Ø 45.75mm Housing Diameter (B): Ø 49.89mm Bearing Width (C): 24.50mm (x4) Bearing Width (C): 19.50mm (x6) Bearing Thickness (D): 2.04mm...

Reference: 4052

€38.33

In stock

Set of crankshaft main bearings (small bearings) Ø 45.50mm - Repair dimension (+0.50) - 1

Set of crankshaft main bearings (small bearings) Ø 45.50mm - Repair dimension (+0.50) - 1

Set of crankshaft bearings (Small bearing) Ø 45.50mm - Repair dimension (+0.50)

Bearing Dimensions: Dimension: Repair Dimension (+0.50) Junnel Diameter (A): Ø 45.50mm Housing Diameter (B): Ø 49.89mm Bearing Width (C): 24.50mm (x4) Bearing Width (C): 19.50mm (x6) Bearing Thickness (D): 2.16mm...

Reference: 4053

€38.33

In stock

Set of side shims - STD thickness 2.36 mm (original dimension) - 1

Set of side shims - STD thickness 2.36 mm (original dimension) - 1

Set of side shims - STD thickness 2.36 mm (Original dimension)

Reference: 4054

€13.33

In stock

Set of side shims - thickness 2.41mm (Repair dimension +0.05mm) - 1

Set of side shims - thickness 2.41mm (Repair dimension +0.05mm) - 1

Set of side shims - thickness 2.41mm (Repair dimension +0.05mm)

Reference: 40150

€13.33

In stock

Set of side shims - thickness 2.46mm (Repair dimension +0.10mm) - 1

Set of side shims - thickness 2.46mm (Repair dimension +0.10mm) - 1

Set of side shims - thickness 2.46mm (Repair dimension +0.10mm)

Reference: 40151

€13.33

In stock

Set of side shims - thickness 2.51mm (Repair dimension +0.15mm) - 1

Set of side shims - thickness 2.51mm (Repair dimension +0.15mm) - 1

Set of side shims - thickness 2.51mm (Repair dimension +0.15mm)

Reference: 40152

€13.33

In stock

Set of 4 connecting rod bushings - 1

Set of 4 connecting rod bushings - 1

Set of 4 connecting rod bushings

Reference: 40122

€52.50

Out of stock

Intake valve - Ø35x7mm (original Ø engine 804 and 812) - 1

Intake valve - Ø35x7mm (original Ø engine 804 and 812) - 1

Intake valve - Ø 35x7x87.6mm (Original for 1255cm³ / 1296cm³ engine - Type 804 and 812)

Valve also suitable for converting to a large exhaust valve version (Ø35x7x87.6mm) Valve with low keyway

Reference: 4055

€20.83

In stock

Intake valve (specific) - Ø 35x7x88mm - R8G / A110 (1255 and 1296 engine) - 1

Intake valve (specific) - Ø 35x7x88mm - R8G / A110 (1255 and 1296 engine) - 1

Intake valve (specific) - Ø 35x7x88mm - R8G / A110 (1255 and 1296 engine)

Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising. Valve with low keyway

Reference: 4027

€21.67

In stock

Large inlet valve Ø38x7mm - 1

Large inlet valve Ø38x7mm - 1

Big inlet valve Ø38x7mm

Valve with low keyway

Reference: 4057

€20.00

Out of stock

Exhaust valve - Ø32.7x7 (original Ø engine 804 and 812) - 1

Exhaust valve - Ø32.7x7 (original Ø engine 804 and 812) - 1

Exhaust valve - Ø 32.6x7x87.5mm (Original for 1255cm³ / 1296cm³ engine - Type 804 and 812)

Valve with low keyway

Reference: 4056

€20.83

In stock

Exhaust valve (specific) - Ø 32.5x7x88mm - R8G / A110 (1255 and 1296 engine) - 1

Exhaust valve (specific) - Ø 32.5x7x88mm - R8G / A110 (1255 and 1296 engine) - 1

Exhaust valve (specific) - Ø 32.5x7x88mm - R8G / A110 (1255 and 1296 engine)

Exhaust valve without shoulder on the keying side to limit smoke caused by oil rising. Valve with low keyway

Reference: 4028

€22.50

In stock

Bronze inlet or exhaust valve guide - Ø 7x11.17x38mm - 1

Bronze inlet or exhaust valve guide - Ø 7x11.17x38mm - 1

Bronze inlet or exhaust valve guide - Ø 7x11.17x38mm

Reference: 4059

€10.83

In stock

Kit of 16 valve half moons Ø7mm - 1

Kit of 16 valve half moons Ø7mm - 1

Kit of 16 valve half moons Ø7mm

Suitable for valves with a groove in the lower position (type BK) and for stems with a diameter of 7mm

Reference: 40116

€49.17

Out of stock

Kit of 8 upper valve retainer cups (1100cc and 1300cc engine) - Ref 0003814700 (38147) - 2

Kit of 8 upper valve retainer cups (1100cc and 1300cc engine) - Ref 0003814700 (38147) - 2

Kit of 8 upper valve retainer cups (1100cm³ and 1300cm³ engine) - Ref 0003814700 (38147)

Compatible with : R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type812) Alpine A110 1100G and 1300G/S

Reference: 4033

€206.67

In stock

Set of 8 valve springs - 1

Set of 8 valve springs - 1

Kit of 16 "Original" valve springs (4 Small and 4 Large) - 1108cm³ / 1255cm³ or 1296cm³ engine

Dimensions of the Large Spring: Outer Diameter: Ø 32.6mm Inner Diameter: Ø 25.1mm Wire Diameter: Ø 3.70mm Free Height (overall): 40.60mm Dimensions of the Small Spring: Outer Diameter: Ø 22.9mm Inner Diameter: Ø...

Reference: 40115

€138.33

In stock

Kit of 8 valve spring washers (Engine 1108cc and 1300cc) - Ref 0003812600 (38126) - 1

Kit of 8 valve spring washers (Engine 1108cc and 1300cc) - Ref 0003812600 (38126) - 1

Kit of 8 valve spring washers (Engine 1108cm³and 1300cm³) - Ref 0003812600 (38126)

Compatible with : R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812) Alpine A110 1100G and 1300G/S

Reference: 4035

€51.67

In stock

Kit of 8 rocker arm adjustment screws + nuts - 1300cc - 1

Kit of 8 rocker arm adjustment screws + nuts - 1300cc - 1

Kit of 8 rocker arm adjustment screws + nuts - 1300cc

Reference: 40136

€86.67

In stock

Set of 8 standard length push rods - 1255cc - 1

Set of 8 standard length push rods - 1255cc - 1

Set of 8 rocker rods (Standard length) - 1255cc and 1296cc engine

Stem Length: Intake: 166mm Exhaust: 189mm

Reference: 40117

€124.17

In stock

Push rod set 2mm longer - Lg: Adm 168mm / Exhaust 191mm - 1

Push rod set 2mm longer - Lg: Adm 168mm / Exhaust 191mm - 1

Set of 8 pushrods 2mm longer than stock - Lg: Adm 168mm / Ech 191mm

2mm longer camshaft rods for re-cut camshafts. Length: Intake: 168mm Exhaust: 191mm

Reference: 40118

€115.00

In stock

Set of 8 valve tappets - R8G - 1

Set of 8 valve tappets - R8G - 1

Set of 8 valve tappets (1300cm³ engine) - R8G / A110

Reference: 40121

€155.00

In stock

Set of 4 engine camshaft rings 812 - R8 G / A110 / 1300cc / R5 Turbo (x2 external Ø 41.44 - x2 external Ø 41) - 1

Set of 4 engine camshaft rings 812 - R8 G / A110 / 1300cc / R5 Turbo (x2 external Ø 41.44 - x2 external Ø 41) - 1

Final Drive Camshaft Bushing Kit - R8G & A110 (1255cm³ /1296cm³ Engine) / R5 Turbo (8220) (1397cm³ Engine)

The set of rings is ready to install, only the lubrication hole must be drilled after installing the rings in the block. Ring dimensions: x2 rings Ø37.90x41.445mm x2 rings Ø37.90x41.00mm Renault OE Ref: 0855569000...

Reference: 4060

€131.67

Out of stock

Original flywheel screw M9x100 - ref 7700854191 - 1

Original flywheel screw M9x100 - ref 7700854191 - 1

Original flywheel screw M9x100 - ref 7700854191

Reference: 6056

€5.42

In stock

Shaft pinion centering ring in engine flywheel - ref 6045759 - 1

Shaft pinion centering ring in engine flywheel - ref 6045759 - 1

Self-lubricating bronze centering ring in flywheel (Ø 12x16x20mm) - ref 6045759 / 7700553174

Reference: 4101

€4.58

In stock

Cylinder head bolt with washer - M11x150 - 1

Cylinder head bolt with washer - M11x150 - 1

Cylinder head bolt with support washer - 1255cm³ and 1296cm³ engine - Ref 0706340500

Screw: M11x150 Length under head: 138mm Sold individually, 10 screws required per motor

Reference: 4062

€11.67

In stock

Engine gasket set (without head gasket) - 1255cc / 1296cc engine - 1

Engine gasket set (without head gasket) - 1255cc / 1296cc engine - 1

Engine gasket set (without cylinder head gasket) - 1255cc / 1296cc engine

Reference: 4012

€101.67

In stock

Cylinder head gasket Ø 77mm - thickness: 1.45mm (original side) - 1

Cylinder head gasket Ø 77mm - thickness: 1.45mm (original side) - 1

Cylinder head gasket Ø 77mm - thickness: 1.45mm (original side)

Reference: 4061

€50.00

In stock

Cylinder head gasket Ø77mm - thickness 1.60mm - 1

Cylinder head gasket Ø77mm - thickness 1.60mm - 1

Cylinder head gasket Ø77mm - thickness 1.60mm

Reference: 4076

€50.00

In stock

Cylinder head gasket Ø77mm - thickness 1.75mm - 1

Cylinder head gasket Ø77mm - thickness 1.75mm - 1

Cylinder head gasket Ø77mm - thickness 1.75mm

Reference: 4077

€50.00

In stock

Copper shim for cylinder head gasket Ø77mm - thickness 0.50mm - 1

Copper shim for cylinder head gasket Ø77mm - thickness 0.50mm - 1

Copper shim for cylinder head gasket Ø 77mm - thickness 0.50mm

Reference: 4063

€60.00

In stock

Cylinder head gasket Ø77.3 (1440 cc engine) - 1

Cylinder head gasket Ø77.3 (1440 cc engine) - 1

Cylinder head gasket Ø77.3 (1440 cc engine)

Thickness 1.2mm

Reference: 4078

€20.00

In stock

Engine oil pan cork seal - small bearing - 1

Engine oil pan cork seal - small bearing - 1

Engine oil pan cork gasket - small bearing

Reference: 4016

€8.33

In stock

Engine Oil Pan Cardboard Gasket (Small Bearing) - 1

Engine Oil Pan Cardboard Gasket (Small Bearing) - 1

Engine Oil Pan Cardboard Gasket (Small Bearing)

Cardboard seal thickness: 1.3mm

Reference: 40123

€18.33

In stock

Cork gasket for rocker cover

Cork gasket for rocker cover

Cork gasket for rocker cover

Reference: 4037

€7.08

In stock

Exhaust manifold gasket in 2 parts - ref 38166 ( The pair )

Exhaust manifold gasket in 2 parts - ref 38166 ( The pair )

Exhaust manifold gasket in 2 parts - ref 38166 ( The pair )

Reference: 4036

€25.00

In stock

Kit of 2 paper seals between intake manifold and cylinder head - Ref 38152

Kit of 2 paper seals between intake manifold and cylinder head - Ref 38152

Kit of 2 paper seals between intake manifold and cylinder head - Ref 38152

Reference: 4013

€7.92

In stock

Rocker cover spark plug well gasket - 1

Rocker cover spark plug well gasket - 1

Rocker cover spark plug well gasket

Engine 812 - 1600 cc - R8 G - A310/4

Reference: 4041

€2.92

In stock

Cup under spark plug well gasket - 1300cc - 2

Cup under spark plug well gasket - 1300cc - 2

Cup under spark plug well gasket - Engine 1300cm³

Reference: 4082

€7.08

In stock

Rocker cover breather - ref 38120 - 1

Rocker cover breather - ref 38120 - 1

Rocker cover breather - Ref 38120

Reference: 4039

€26.67

In stock

Rocker cover breather O-ring - Ref 8555689

Rocker cover breather O-ring - Ref 8555689

Rocker cover breather O-ring - Ref 8555689

Reference: 4040

€0.83

In stock

Oil breather hose to be cut - Ø14x19mm (length 1m)

Oil breather hose to be cut - Ø14x19mm (length 1m)

Oil breather hose to be cut - Ø14x19mm (length 1m)

Reference: 4221

€7.50

In stock

Timing kit with chain - sprockets (x2) - cork casing gasket - oil seal - 1

Timing kit with chain - sprockets (x2) - cork casing gasket - oil seal - 1

Timing kit with chain, x2 sprockets, cork crankcase gasket & oil seal

Single chain: x58 links Crankshaft sprocket x17 teeth and camshaft sprocket x34 teeth Oil seal: Ø 35x50x8mm Timing cover gasket: Cork and rubber

Reference: 4019

€65.83

In stock

Cork timing cover gasket

Cork timing cover gasket

Cork timing cover gasket

Reference: 4018

€3.75

In stock

Single Timing Chain - 58 Links (Premium Quality) - 1

Single Timing Chain - 58 Links (Premium Quality) - 1

Single Timing Chain - 58 Links (Premium Quality) - Réf 7700722758

Réf OE Renault : 7701349098 / 7700722758

Reference: 4020

€15.00

In stock

Crankshaft pinion for timing (17 teeth) - Premium Quality

Crankshaft pinion for timing (17 teeth) - Premium Quality

Crankshaft pinion for timing (17 teeth) - Premium Quality

17 tooth sprocket for single timing chain

Reference: 4026

€11.67

In stock

Single chain tensioner - 1

Single chain tensioner - 1

Hydraulic timing chain tensioner with automatic winding (Superior Quality)

Automatic spring-loaded tensioner Features a grease fitting to ensure lubrication and maintain tension of the chain guide against the chain Renault OE Ref: 084627500 / 7700578993 / 7700719076 / 7701349603

Reference: 4021

€43.33

In stock

Timing Camshaft Sprocket (34 Teeth) - Premium Quality - 1

Timing Camshaft Sprocket (34 Teeth) - Premium Quality - 1

Timing Camshaft Sprocket (34 Teeth) - Premium Quality

34-tooth sprocket for single chain timing chain

Reference: 40113

€30.83

In stock

Adjustable camshaft sprocket for single chain (34 teeth) - 1

Adjustable camshaft sprocket for single chain (34 teeth) - 1

Adjustable camshaft sprocket for single chain (34 teeth)

Reference: 40131

€106.67

In stock

Camshaft end washer (1108cc / 1300cc / 1400cc engine) - Ref 0608441400 - 1

Camshaft end washer (1108cc / 1300cc / 1400cc engine) - Ref 0608441400 - 1

Camshaft end washer (1108cm³ / 1300cm³ / 1400cm³ engine) - Ref 0608441400

Compatible with : R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type 812) Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S R5 Turbo 1 and 2 (1397cm³) R12.TS (1289cm³)

Reference: 6004

€15.00

In stock

Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200 - 1

Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200 - 1

Camshaft stop plate (1108cm³ / 1300cm³ / 1400cm³ engine) - Ref 7700525087 / 0607631800 / 0607378200

Compatible avec : R8G R1134 (Moteur 1108cm³ - Type 804) / R1135 (Moteur 1255cm³ et 1296cm³ - Type 812) Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S R5 Turbo 1 et 2 (1397cm³) / R5 Alpine Turbo / R5 Alpine...

Reference: 5009

€11.67

In stock

Bolt with washer and camshaft sprocket retainer - R8G 1130 / 1255 / 1296 and A110.1300S / G - 1

Bolt with washer and camshaft sprocket retainer - R8G 1130 / 1255 / 1296 and A110.1300S / G - 1

Bolt with washer and camshaft sprocket retainer - R8G 1130 / 1255 / 1296 and A110.1300S / G

Reference: 40143

€5.42

In stock

Timing side oil seal - 35x50x8 - 1

Timing side oil seal - 35x50x8 - 1

Timing side oil seal - 35x50x8

Reference: 4022

€7.92

In stock

Flywheel side oil seal - 70x90x10 (small bearing) - 1

Flywheel side oil seal - 70x90x10 (small bearing) - 1

Flywheel side oil seal - 70x90x10 (small bearing)

Reference: 4023

€13.33

In stock

Cooling circuit drain screw or plug on the engine block - Ref 0607247100 / 7703075009 - 1

Cooling circuit drain screw or plug on the engine block - Ref 0607247100 / 7703075009 - 1

Cooling circuit drain screw or plug on the engine block - Ref 0607247100 / 7703075009

Bleeder Screw Diameter: Tapered Thread - 1/8" NPTF (+/- 10.29mm) Original OE Ref: 6072180 / 0607218000 / 6072471 / 0607247100 / 7703075009

Reference: 40012

€5.83

In stock

Cylinder head inspection steel plate - Ref 0607153900

Cylinder head inspection steel plate - Ref 0607153900

Cylinder head inspection steel plate - Ref 0607153900

Reference: 4232

€7.50

In stock

Cylinder head inspection plate gasket - ref 0607154000

Cylinder head inspection plate gasket - ref 0607154000

Cylinder head inspection plate gasket - ref 0607154000

Reference: 4058

€2.50

In stock

Water pump with gasket - R8 - ref: 9806905 - 1

Water pump with gasket - R8 - ref: 9806905 - 1

Water pump with seal - R8 / Caravelle / A110 / Matradjet

sold with the water pump joint Réf OE : 7701506944 / 7701457453

Reference: 4203

€38.33

In stock

High flow water pump - R8 / R8G - 2

High flow water pump - R8 / R8G - 2

High flow water pump - R8 / R8G / A110

Sold with the water pump gasket The high-flow water pump allows for increased performance without any modifications. It installs in place of the original Renault or Alpine pump.

Reference: 4230

€75.00

In stock

Water pump seal - ref 0555540000

Water pump seal - ref 0555540000

Water pump seal - ref 0555540000

Reference: 4201

€2.92

In stock

Water pump rear bearing - 15x35x11 - ref 22089M - 1

Water pump rear bearing - 15x35x11 - ref 22089M - 1

Water pump rear bearing - Ø 15x35x11mm - Ref 22089M

Suitable for: Simca 1000 / 1200S / R1 / R2 / R3 / CG - Ref 22089M Renault R8 / R8G / Floride / Caravelle Alpine GT4 / A110 (1100Cm³ / 1300cm³) Matradjet These bearings are only suitable for old generation water...

Reference: 9226

€5.00

In stock

Showing 1-72 of 150 item(s)

1
2
3
Next

1

Left column

Top

Please sign in first.

Sign in