Best sellers
Suitable for:
Boxes 367-05 / 367-11
Boxes 369-02 / 369-04 / 369-07 / 369-09 / 369-10 / 369-15
Box UN1
In stock
In stock
Thickness: 1.2mm
In stock
In stock
In stock
Identical key for door and trunk lock.
In stock
In stock
This hose is also suitable for carburetors with a cold-start choke controlled by a thermostatic spring heated by hot water (Hose from the cold-start heater to the carburetor base)
OE Renault Ref: 8575004 / 0857735000...
In stock
Filter Dimensions:
Inner Diameter (D2): Ø 86mm
Outer Diameter (D1): Ø 128mm
Height (H1): 175mm
Height (H2): 164mm
The dimensions given are for guidance only; slight variations of a few millimeters are possible...
In stock
Out of stock
In stock
In stock
The sets are supplied with the following components:
Liners (x4)
Pistons (x4)
Rings (x12)
Pin (x4)
Circle clips (x8)
Dimensions of the various parts:
Liner bore diameter: Ø 54.5mm
Liner flange or top diameter...
In stock
In stock
In stock
To replace the 3/4"-16UNF oil filter with a M20x150 filter
Thread on engine block side: 3/4"-16UNF
Thread on filter side: M20x150
Overall length: 50mm
In stock
In stock
In stock
Suitable for valves with a groove in the upper position (type KK) and for stem diameter 8mm
In stock
In stock
In stock
In stock
Out of stock
The sets are supplied with the following components:
Liners (x4)
Pistons (x4)
Rings (x12)
Pin (x4)
Dimensions of the various parts:
Liner bore diameter: Ø 76mm
Liner flange or top diameter (D): Ø 90.10mm
Liner...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Useful length (L sur schéma photo numéro 3): 27mm
Sold with the pin
OE Renault / Alpine Ref: 0607330800
In stock
In stock
Overall length: 188cm
Sheath length: 180.5cm
Cable length: 188cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
Spacing respected, to be laid directly according to the laying plan provided
In stock
In stock
In stock
Pouche delivered with primary shaft oil seal Ø 17x28x7mm
Suitable for:
R4 / 4L : Gearbox (4 speeds)354 / HA0 / HA0-...
R5 : Gearbox (4 speeds)354 / HA0 / HA0-....
In stock
For use with a temperature meter (water or oil)
Out of stock
In stock
In stock
In stock
R12 TS: Double body carburettor 32 DIR / ref: 7700549684
A110.V85
Out of stock
Center distance between flange and intake manifold (Side without stud): 32mm and 102mm
Center distance between flange and carburetor (Side with stud): 92mm and 60mm
Flange thickness: 17.5mm
Pipes diameter: Ø 36.5mm...
Out of stock
This kit contains the following references:
6000000112 / 6000000113 / 6000000115 / 6000000116 / 6000000117 / 6000000118 / 6000000119 / 6000000120
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Junnel Diameter (A): Ø 54.55mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 20.50mm
Bearing Thickness (D): 2.07mm
Smooth, lug-type bearings with grease...
In stock
Original type screw with slotted recess
In stock
Length 1 meter
In stock
Out of stock
For Dauphine, R8, Floride, Alpine A108, and Alpine A110.
Overall length: 380 cm
Sheath length: 375 cm
Cable length: 380 cm
Our cables are made in France and meet the assembly and quality standards of original...
In stock
In stock
OE Renault Ref: 0855969000 / 0855893300 / 7703087062
In stock
In stock
In stock
In stock
R12 TS: Double body carburettor 32 DIR / ref: 7700534929
A110.V85
In stock
In stock