Suitable for the following models:
- R5 Alpine Coupe
- R12G
- R15.TS / R16.TX
- R17.TL / TS / Gordini
Out of stock
Best sellers
In stock
In stock
In stock
Designed to be used only with original springs (12.5mm wire diameter).
Sold individually.
In stock
In stock
In stock
Suitable for: A310.4: 1600VE n°1066 at the end and 1600VF n°21066 at the end A310.6: Before 1980 (n°1 to n°47708)
In stock
Coolant hose compatible with Alpine:
A110 SC / Si (1600VD) and SX (1600VH): Front end and engine compartment cooling hose
A310.4 1600VE and 1600VF (From #1 to end of series): Right and left radiator hose, front end...
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 125l/h
Max pressure: 0.30bar
Suction: -0.10bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm /...
In stock
In stock
Suitable for:
A310.4: Front disc for n°1 to n°909
A310.6: Front disc for n°1 to n°47708 (before 1980)
R5 Alpine Turbo (122B) / Alpine Coupe: Front disc
R12G / R17G: Front disc
In stock
In stock
Out of stock
This ignition harness consists of 6 spark plug wires and 1 coil wire.
We would like to point out that our spark plug harnesses are made with 7mm diameter, black silicone wires with a standard copper core, which means...
In stock
In stock
Please note that you also need the AVP9028 seal
In stock
Suitable for:
R4 Saloon / F4 & F6 Van / Rodeo: Front Disc
R5 Alpine (1223): Front Disc
R5 Alpine Turbo (122B) / Alpine Coupe / GR2: Rear Disc
R12 / R15TL: Front Disc
R12G / R17G / R17TS: Rear Disc
In stock
In stock
In stock
In stock
In stock
For mounting a belt width: 13mm
Groove for a 5mm key
A steel collar is installed on the oil seal surface for improved sealing and reduced pulley wear.
In stock
In stock
3-tube pump: Inlet - Outlet - Return
Sold without seal and without thermal wedge
In stock
Compatible with 1565cm³ to 1647cm³ engines (type 807, 844, 843):
A110 1800cm³
A310 1600cm³
R12G / R17G
R16.TS / TX
Out of stock
Dimensions: 600mm x 105mm
Sticker on transfer paper, ready to apply.
In stock
Steering rack repair kit with bushings and seals - R4 / R5 and Super 5 (All models) - Ref 7701455251
Plastic ring dimensions: Ø 21x30mm
Plastic ring width: 14mm
Kit contents:
Plastic guide ring x1
Rubber sealing gasket x2
Steel washer x2
Internal circlip x1
Renault OE part number: 7701455251
In stock
In stock
OE Renault Ref: 7700611453 / 7701348715
In stock
This bracket attaches to the gearbox studs.
In stock
In stock
In stock
In stock
Designed to be mounted only with the original springs (wire Ø 12.5mm).
Sold individually.
In stock
Out of stock
In stock
In stock
In stock
In stock
Suitable for all GOTTI rims with Ø 64.5mm plastic caps
Outer diameter: Ø 45mm
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
Filter Dimensions:
Inner Diameter (D2): Ø 86mm
Outer Diameter (D1): Ø 128mm
Height (H1): 175mm
Height (H2): 164mm
The dimensions given are for guidance only; slight variations of a few millimeters are possible...
In stock
In stock
In stock
In stock
Out of stock
In stock
Overall Length: 227.5cm
Sheath Length: 176cm
Cable Length: 218cm
Suitable for cars with a handbrake under the dashboard:
A110.1300 VA and VB (From No. 11952 to the end…)
A110.1300 VC (From No. 11913 to the end…)...
In stock
Bowl diameter on the gearbox side: Ø 76mm
Shaft diameter: Ø 20mm
Bowl length: 90mm
In stock