kit of 6 aviation brake hoses (stainless steel braided) - R2 / R3 / CG 1300 (B1300)

Bearing Dimensions:

• Dimension: Repair Dimension (+0.20)
• Crankpin Diameter (A): Ø 40.76mm
• Housing Diameter (B): Ø 44.00mm
• Bearing Width (C): 19.24mm
• Bearing Thickness (D): 1.61mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal

Need 4 kits for a Simca 1000

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• Supplied with 3 screws for fixing the plate
• Instructions included

Suitable for:

• Simca 1000: Drum Brake
• Simca R1 / R2 / R3: Disc Brake
• Simca 1200S (After 1970) / CG: Disc Brake

Bearing Dimensions: Ø 27x50.3x14.2mm and Ø 20x47x15.2mm

Oil Seal Dimensions: Ø 38x52x8mm

• Center distance between flange and intake manifold (Side without stud): 32mm and 102mm
• Center distance between flange and carburetor (Side with stud): 92mm and 60mm
• Flange thickness: 17.5mm
• Pipes diameter: Ø 36.5mm
• Flanges supplied with paper gaskets (x4) and mounting studs (x8) (Carburetor side)

These rigid aluminum flanges replace the original flanges known as "soft" rubber that tears with wear.