Steel insert / barrel for wheel nut with 60° cone for GOTTI rim

• Suitable for GOTTI rims with bolts 45mm under the head and 6mm in diameter
• Suitable for GOTTI No. 7
• Specific treatment and hardness
• Tightening 16 Nm

• Suitable for GOTTI rims with 6mm diameter bolts
• Self-locking nut in reinforced steel

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• Supplied with 3 screws for fixing the plate
• Instructions included

Suitable for:

• R5 All models (2nd Version)

Seal dimensions:

• Inner diameter: Ø 22mm
• Outer diameter: Ø 33.3mm
• Height (excluding lugs): 5mm
• Recessed diameter: Ø 25.8mm
• Push button diameter: Ø 21.5mm

Suitable for:

• R8 / A110: Front big brake assembly
• R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front brake
• A310.4: Front brake
• A310 V6 (Before 1980): Front brake
• R12 (All models): Front brake
• R15 / R16 / R17 (All models): Front brake

For competition use only, do not use these pads on public roads.

- Primary winding resistance: 3.1 ohms

- Coil compatible with electronic ignition kits ref 4798 and ref 4799

• Suitable for GOTTI rims with Ø 6mm bolts (except GOTTI rim No. 7)
• Zinc-plated steel washer to be positioned on the nut side

Suitable for:

• R8 / A110: Rear Big Brake Assembly
• R5 Alpine Turbo (122B): Rear Brake
• A310.4: Rear Brake
• A310.6 (Pre-1980): Rear Brake
• R12G / R17G: Rear Brake

For competition use only, do not use these pads on public roads.