Sheets (x4)
Sheet Dimensions:
Sheet Bore Diameter: Ø 77.8mm
Sheet Flange or Top Diameter (D): Ø 96mm
Sheet Base Diameter (A): Ø 82.50mm
Sheet Height (including skirts, overall) (C): 143.50mm
Sheet Height to Base...
In stock
Best sellers
The sets are supplied with the following components:
Cylinder Heads (x4)
Domed Pistons (x4)
Rings (x12)
Pin (x4)
Circle Clips (x8)
Dimensions of the various parts:
Cylinder Head Bore Diameter: Ø 77.75mm
Cylinder...
In stock
Length under head: 40.5mm
Significantly greater strength than the original, ideal for tuned engines.
Suitable for:
Renault Clio 1.8 L 16S (F7P Engine)
Clio Williams 2.0L 16S (F7R Engine)
Clio RS 2.0L 16S (F4R Engine)
In stock
Fits driver or passenger side
Slider adjustment range: 120mm forward and 93mm rearward
Slider height: 24mm
Double locking mechanism
Compatible with AVP 69118 and AVP 69119 seats
Out of stock
Mahogany steering wheel with glossy zebrawood finish and anatomic rear section
Entirely handcrafted steering wheel
Steering wheel outer diameter: Ø 350mm
Flushing: 37mm
Steering wheel cross-section: 27mm
Hub mounting...
In stock
Allows control of nozzle calibration
Graduation is 0.10 mm in 0.10 mm increments, with a minimum of 1.5 mm to 3.00 mm and a maximum of 1.5 mm.
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.75)
Junnel Diameter (A): Ø 54.05mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 19.50mm
Bearing Thickness (D): 2.32mm
Smooth, lug-type bearings with grease...
In stock
Limited special offer
In stock
- For long master cylinder push rod
- Piston depth 38mm
In stock
When installing on a Manolène (plastic) fuel tank, you may need to trim the tip of the cap's locking mechanism so that it does not touch the underside of the hood.
Cap thread: 2.75" x 16 TPI
Cap width: 86.5 mm
Cap...
Out of stock
Segment Characteristics:
Segment Diameter: Ø 75.70mm
Thickness of Upper Segments (Fire-resistant): 1.00mm
Thickness of Intermediate Segments (Waterproof): 1.20mm
Low ring thickness (Scraper): 2.5mm
It is essential...
In stock
Out of stock
Out of stock
Out of stock
Diameter on the rack side: M12x100 (Right hand thread)
Diameter on the steering ball side: M14x150 (Right hand thread)
In stock
In stock
This sprung clutch disc, featuring riveted sintered metal pads and reinforced springs, is a direct replacement for the original unit and requires no flywheel modification.
Essential for transferring engine power to...
In stock
