Best sellers
For engine with 4-outlet water pump.
Kit sold without valve stem seals (AVP1012), without copper base seals and without the timing case oil seal (AVP1029).
In stock
In stock
In stock
In stock
Very malleable aluminium, bends easily.
In stock
In stock
Bandjo fixing screw: Ø3/8" - 24UNF
In stock
In stock
Suitable for:
4CV: After 1956
Dauphine
R8 / R8S / R8G
Caravelle / Florida S
A106 / A108
A110
Matradjet
In stock
In stock
Profile to form (Very malleable aluminum, bends easily)
In stock
Thickness: 1.81mm
Width: 20.75mm
In stock
In stock
4L: Box / 354 / HAO-146 / HAO-163 / HAO-191
R5: Box 385 / NG5
In stock
Bandjo fixing screw: Ø3/8" - 24UNF (Ø 9.52mm)
In stock
In stock
In stock
In stock
In stock
Suitable for:
4CV/Juvaquatre
Dauphine (1st model)
Alpine A106
In stock
In stock
In stock
Suitable for the following gearboxes:
- Box 353
- Box 364-05 / 364-06
- Box 365-00 / 365-02 / 365-10 / 365- 14 / 365-20 / 365-24 / 365-28 / 365-29 / 365-33
- Box 385
In stock
In stock
In stock
Thread: M10x100
Length under head: 100mm
Need 10 screws per motor
In stock
In stock
Out of stock
In stock
In stock
Suitable for:
5-speed gearbox A110 / A310.4: Gearbox 365-00 / 365-02 / 365-05 / 365-10 / 365-20 / 365-33
Gearbox R12 / R12G / R15 / R17 / R17G: Gearbox 352 /365 / 395
5-speed gearbox R5 Alpine: Gearbox 385
In stock
Length: 17.5cm
Male/Female Connector: Ø 3/8"-24UNF
Suitable for:
Simca R2 / R3
Simca 1200S / CG (B1200/C1300)
In stock
In stock
In stock
In stock
In stock
Vendu sans vis de réglage, ni manette de frein à main . Etrier équipé de joint carré.
Se monte sur :
Dauphine (Freins à disques)
R8 / Caravelle / Floride S
A110 (Montage Petits freins)
In stock
In stock
In stock
In stock
For diaphragm clutch mechanism
In stock
Valve with low keyway
In stock
In stock
Suitable for:
Simca 1000: Rear Drum Brake
Simca R1 / R2 / R3: Rear Disc Brake
Simca Coupé 1000: Rear Disc Brake
Simca 1200S (After and After 1970) / CG: Rear Disc Brake
Bearing Dimensions: Ø 27x50.3x14.2mm (x2)
Oil...
In stock
Provide a shaft extension on the igniter drive pinion side, possibility of making it with the old pump shaft (provide about 28mm)
Out of stock
In stock
In stock