Lower heating hose of the Sofica - Dauphine (All models) / A108

Bearing Dimensions:

• Dimension: Stock Dimension (Standard)
• Junnel Diameter (A): Ø 39.99mm
• Housing Diameter (B): Ø 44.01mm
• Bearing Width (C): 27.13mm (x2)
• Bearing Width (C): 30.12mm (x2)
• Bearing Width (C): 32.87mm (x2)
• Bearing Thickness (D): 1.99mm
• Smooth, lug-type bearings with grease holes (x4) and grooves (x6)
• Bearing material:Bi-metal

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Stud Dimensions:

• • Stud Thread: M12 (1.25 Pitch / Class 10.9)
  • Stud Head Diameter: Ø 19.80mm
  • Stud Recess Diameter: Ø 14.30mm
  • Length Under Head: 36mm
  • Overall Length: 41mm

Suitable for models :

• • R12: All models (Rear hubs with drum brake)
  • R17 TL: R1312 From #1 to 30470 (Rear hubs with drum brake)
  • R17 TL: R1322 From #1 to 2450 (Rear hubs with drum brake)
  • R16 TS: R1151 (Front hubs with disc brake and rear hubs with drum brake)
  • R16 L/TL: R1153 (Front hubs with disc brake)

Suitable for engines:

• Engine Type 670-05: Dauphine Gordini (R1093 / R1095) / Estafette / Floride (R1092) / A106 / A108
• Engine Billancourt Type 680-... and 800-...: R4 / 4L / R5

Valve with low keyway

Valve sold individually