In stock
Best sellers
In stock
In stock
In stock
In stock
In stock
In stock
Caliper equipped with square joint.
Fit on:
Dauphine (Disc brakes)
R8 / Caravelle / Floride S
A110 (Small brakes mounting)
In stock
In stock
In stock
Need x6 gaskets to equip an engine
Sold individually
In stock
Kit containing a paper gasket and a specific thermal spacer/gasket.
The thermal spacer insulates the carburetor from engine heat, thereby limiting vapor lock issues.
Gasket specifications:
Mounting hole spacing:...
In stock
4L: Box / 354 / HAO-146 / HAO-163 / HAO-191
R5: Box 385 / NG5
In stock
In stock
Bandjo fixing screw: Ø3/8" - 24UNF (Ø 9.52mm)
In stock
Caliper equipped with square joint.
Fit on:
Dauphine (Disc brakes)
R8 / Caravelle / Floride S
A110 (Small brakes mounting)
In stock
In stock
In stock
Need x2 lengths of 3 meters for a car (Sold individually)
In stock
Sold with water pump gasket
Distance between two pulley mounting bolts (Center-to-center distance):50mm
Pulley mounting using x4 M8 bolts (Not supplied)
Renault / Alpine OE Ref: 7701506944 / 7701457453
Suitable...
In stock
In stock
Out of stock
In stock
In stock
In stock
Supplied with carburetor needle valve: 1.5
Suitable for carburetor:
Solex 32 DISTA
Solex 32 PDIST
Solex 32 DITA-3
Out of stock
Bearing Dimensions:
Dimension: Original (Standard) Dimension
Crankpin Diameter (A): Ø 43.98mm
Housing Diameter (B): Ø 47.62mm
Bearing Width (C): 20.75mm
Bearing Thickness (D): 1.81mm
Smooth, lug-type bearings with no...
In stock
For engine with 1 outlet water pump.
Kit sold without valve stem seals (AVP1012), without copper base seals and without the timing case oil seal (AVP1029).
In stock
In stock
Identical to the YORKA and SEIMA branded keycaps
Out of stock
In stock
Sold individually
Width: 28mm
Length: 39mm
Height: 25mm
In stock
In stock
OE Renault Ref: 7703090187 / 0857568100 / 7703090277
In stock
In stock
The kit contains:
4 x 8mm smooth-bore screws - M8 thread (to be positioned on the wheel side)
4 x 8.4mm smooth-bore screws - M8 thread (to be positioned on the body or chassis side)
Alpine / Renault OE Ref:...
In stock
In stock
Valve also suitable for converting to a large exhaust valve version (Ø35x7x87.6mm)
Valve with low keyway
In stock
In stock
In stock
A single 5.20m reel is useful for making both sides of the car (right and left).
In stock
In stock
In stock
In stock
In stock
Cup Dimensions:
Inner Diameter: Ø 29.75mm
Outer Diameter: Ø 42mm
Height: 5.2mm
In stock
R4 (Billancourt Engine): Alternator belt - Ref 0854249800
R5 Alpine (1223) / R5 alpine Turbo (122B): Water pump belt
In stock
In stock
Suitable for:
Simca 1000 / 1200S / R1 / R2 / R3 / CG - Ref 22089M
Renault R8 / R8G / Floride / Caravelle
Alpine GT4 / A110 (1100Cm³ / 1300cm³)
Matradjet
These bearings are only suitable for old generation water...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
In stock
In stock
In stock