Crankshaft bearing set Ø 40mm - STD (Original dimension)
Reference:
1023
Bearing Dimensions:
- Dimension: Stock Dimension (Standard)
- Junnel Diameter (A): Ø 39.99mm
- Housing Diameter (B): Ø 44.01mm
- Bearing Width (C): 27.13mm (x2)
- Bearing Width (C): 30.12mm (x2)
- Bearing Width (C): 32.87mm (x2)
- Bearing Thickness (D): 1.99mm
- Smooth, lug-type bearings with grease holes (x4) and grooves (x6)
- Bearing material:Bi-metal
€36.00
(tax incl.)
Also suitable for 4L: Engine 800-02/05 from 1962 (2 groove bearing)
Customers who bought this product also bought:
- CAUTION: Rough ring, to be ground to the piston pin diameters after installation.
- Sold individually; 4 bushings are needed per motor.
In stock
- The hose outlet is oblique: Ø 3/8" - 24UNF(Ø 9.52mm)
Suitable for:
- 4CV: Front Left Brake (From early 1956 to late 1956)
- Dauphine / Floride : Front Right Brake
- R8 (Drum Brake): Rear Right Brake
In stock
&media=https://www.arnaudventouxpieces.com/6611-large_default/set-of-crankshaft-main-bearings-o-40mm-std-original-dimension.jpg){kind=link}
In stock
Cylinder head gasket specifications:
-
- Crimping diameter: Ø 59.7mm
- Cylinder head gasket thickness:1.40mm
Installation direction:
The marking "Top" or "Haut" on the cylinder head gasket must be facing the Cylinder head (upwards).
For gaskets that do not have "top" or "high" markings, but have a manufacturer's part number, orient this part number towards the cylinder head.
If there are no markings (TOP, HIGH, or manufacturer's part number), the gasket does not have a specific orientation.
However, it is still necessary to check the correct positioning of the water and oil passages to ensure proper installation.
In stock