Lower Control Arm Pin (Smooth body Ø 16mm - Thread M14x2.00) - Ref. 5540584 / 055405840

Reference:

4342

Axle specifications:

Smooth shaft diameter: Ø 16mm
Thread diameter: M14x200 (right-hand thread)
Smooth shaft length: 15.8cm
Overall length: 25.2cm
Supplied individually, without nut

Suitable for:

4CV: Post-1956
Dauphine
R8 / R8S / R8G
Caravelle
Floride / Floride S
A106 / A108
A110 (All models)
Matradjet

You may also like

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut (Chassis side) M14x200 - Ref 8083101442 / 7703034031

Suitable for:

4CV: After 1956
Dauphine: Lower and Upper Wishbone Axle (Chassis Side)
R8 / R8S / R8G
Caravelle / Floride S
A106 / A108
A110
Matradjet

Reference: 4375

€1.25

Add to cart

In stock

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle or lower or upper suspension ball joint nut M12x125 - ref 8083111252 / 7703034005

Reference: 4344

€1.25

Add to cart

In stock

8 special square head lower triangle fixing screws - 1

Kit of 8 special screws (square heads) for fixing the lower front triangle (screws Ø 8mm and Ø 8.4mm)

The kit contains:

4 x 8mm smooth-bore screws - M8 thread (to be positioned on the wheel side)
4 x 8.4mm smooth-bore screws - M8 thread (to be positioned on the body or chassis side)

Alpine / Renault OE Ref: 0706289800 / 0706290200

A kit is required to equip both front wishbones of a car

Reference: 4339

€33.33

Add to cart

In stock

Upper Wishbone Pin (Smooth body Ø 14mm - Thread M12x1.25) - Ref. 060798800

Bolt specifications:

Smooth shank diameter: Ø 14mm
Thread diameter: M12x1.25 (right-hand thread)
Length under head: 15.8cm
Total length: 16.2cm
Supplied individually, without nut

Suitable for:

R8 / R8S / R8G
Caravelle / Floride S
A106 / A108
A110 (All models)
Matradjet

Reference: 4343

€26.67

Add to cart

In stock

Customers who bought this product also bought:

New Rear Right Brake Caliper - Ø 32mm

Sold without adjusting screws or handbrake lever. Caliper equipped with a square seal.

Suitable for:

Dauphine / Dauphine Export (Disc brakes)
R8 / Caravelle / Floride S
A110 (Small brake setup)
Matra Djet: Left Rear Brake Caliper

Reference: 4474

€123.33

Add to cart

In stock

Aluminum water pump pulley - Ø 164mm - Gordini engine (1108cm³ / 1255cm³ and 1296cm³)

For mounting a belt width: 13mm

Reference: 4043

€68.33

Out of stock

T-shaped washer connector - Ø4mm

Reference: 2984

€2.08

Add to cart

In stock

Spark plug wire harness (x4) and coil (x1)

This ignition harness consists of4 spark plug wires and 1 coil wire.
We would like to point out that our spark plug wires are made with Ø 7 mm silicone wires, black in color, with a standard copper core (wire material), which indicates that they do not have interference protection.
If the vehicle is equipped with sensitive electronic accessories, such as Radios, tripmasters, monitors, or certain electronic ignition kits may cause interference or disruption.