Lower mounting eye width: 21mm
Lower mounting eye inner diameter: Ø 9mm
In stock
Best sellers
Ball joint: M10x125 axle - Cone Ø 11.60mm to Ø 13mm
Center distance between wishbone mounting: 42mm and 48mm
Ball joint mounting diameter: 38mm
Renault OE Ref: 0996064400
Suitable for:
R16 TS (R1151): From start to...
In stock
Mounting hole spacing: 55mm
Suitable for the following vehicles:
R4 / 4L
RODEO
In stock
Overall length: 248.5 cm
Sheath length: 239 cm
Cable length: 248.5 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
In stock
In stock
Out of stock
Possible mounting on the 4CV / Dauphine and Dauphine Gordini cylinder head (aligned or offset mounting holes)
Intake manifold inner diameter: Ø 29mm
Exhaust manifold inner diameter: Ø 29mm
Outlet inner diameter: Ø...
Out of stock
Suitable for WEBER 40DCOE AND 45DCOE carburetors
This fits on the side opposite the throttle control
Part number 86 on exploded view
Also suitable for: 30 IBA, 32 IBA, 36 DCNF, 36 DCNFA, 36 DCNV, 36 DCNVA, 38 DCOE,...
In stock
Dimensions: 600mm x 105mm
Sticker on transfer paper, ready to apply
In stock
Glass bowl Ø 67mm
Filter element: Interchangeable paper cartridge
One inlet: dual size 6 and 8mm
One outlet: dual size 6 and 8mm
Regulation pressure: Regulation range from 0 to 0.6 bar
Compatible with fuel SP95 /...
In stock
Trumpet Dice Dimensions:
Inner Diameter: Ø 18.4mm
Outer Diameter: Ø 29.96mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.80mm
Shoulder Height: 4.20mm
Dice with dust seal.
Sold individually
In stock
In stock
In stock
In stock
Suitable for:
Simca Coupé 1000: Disc brake
Simca 1200S (Before 1970) / CG: Disc brake
Bearing dimensions: Ø 27x50.3x14.2mm and Ø 17.45x39.9x14.55mm
Oil seal dimensions: Ø 38x52x8mm
In stock
In stock
In stock
In stock
This harness uses the color codes of the original wires and terminals
Harness sold with its installation plan, all the connectors are identified and labeled
Harness for mounting with original terminal boxes or modern...
In stock
This harness uses the color codes of the original wires and terminals
Harness sold with installation plan, all connectors are identified and labeled
Harness for mounting with original terminal boxes or modern fuse...
In stock
Out of stock
In stock
Ring Dimensions:
Inner Diameter: Ø 18mm
Outer Diameter: Ø 23.98mm
Height: 30mm
In stock
1-pin base / aligned pins
Dimensions: 25x47 mm
Part Number: 7701348017
Due to the wide variety of bulb types used, please check compatibility with your vehicle.
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Original type screw with slotted recess
In stock
Suitable for WEBER 40DCOE carburetors (First and last generation)
This spacer fills the gap between the 4.5 venturi outlet and the carburetor body.
It allows the installation of screw-on aluminum velocity stacks...
In stock
Suitable for WEBER 40DCOE carburetor
Protrusion length from the carburetor = 25mm
Stud/nut mounting
Allows the installation of high-performance filters REF 48099 or 48100
Also suitable for AVP sock filter ref 48103...
In stock
In stock
This kit is composed of:
AVP5214 Ø 25 to 40mm x17
AVP5209 Ø 40 to 60mm x1
In stock
Delivered without fuses
Dimensions: Lg 185mm x W 53mm x H 43mm - Fixing distance: 175mm
Out of stock
In stock
Overall length: 162.5cm
Sheath length: 144cm
Cable length: 156cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
In stock
In stock
Out of stock
In stock
In stock
Out of stock
Overall length: 156.5cm
Sheath length: 149cm
Cable length: 156.5cm
Cable with screw-on end in the speedometer
Renault OE Ref: 7700556572 / 7700562177 / 7701348392
Suitable for:
R5 Alpine (R1223): From...
In stock
These twin-tube hydraulic shock absorbers are designed for versatile use, including road and rally driving.
With a firmer damping than conventional shock absorbers, these are perfect for sportier driving, while still...
In stock
Pair of pivots sold with:
x2 Pivot axles with clamps
x4 Bronze bushings
x2 Rubber dust caps
x2 Nylon washers
This is an exchange product. Please contact us and return your old ones. pivots (no screws in good...
In stock
Complete carburetor overhaul kit including:
Floor bowl gasket
Base gasket
Heat shim
Copper gasket
Diaphragm
In stock
34-tooth sprocket for single chain timing chain
In stock
This ignition harness consists of 4 spark plug wires and one coil wire.
Terminals on coil straight
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like...
In stock
Suitable for all GOTTI rims with Ø 64.5mm plastic caps
Outer diameter: Ø 45mm
In stock
This kit is composed of:
AVP 5223 Ø 12 to 20mm x4
AVP 5215 Ø 16 to 27mm x8
In stock
Delivered without fuses
Dimensions: Lg 122mm x W 47mm x H 27mm - Fixing distance: 90mm
In stock
Delivered without fuses
Dimensions: Lg 92mm x W 47mm x H 27mm - Fixing distance: 60mm
In stock
This ignition harness consists of 6 spark plug wires and 2 coil wires.
We would like to point out that our spark plug harnesses are made with 7mm diameter, black silicone wires with a standard copper core, which...
In stock
In stock
This bracket attaches to the gearbox studs
In stock
It is recommended to perform a dry fit of all body components to ensure proper alignment. Adjustments may be necessary.
Shipping available. Contact us to obtain a transport quote and find out our conditions....
In stock
4L: R1123/ R1125 / R1129 / R2106 / R2391 / R2392 from 1976 to 1982
4L: R1123 / R 2106 / R2391 after 1983
In stock
In stock
In stock
Supplied with 4 carburetor mounting studs
Carburetor mounting stud distance: 110mm and 70mm
The carburetor is mounted directly onto the manifold. A seal is ensured by two paper gaskets; there is no need to use...
In stock