Kit for metal tank treatment from 40 liters to 70 liters

Suitable for:

• R8 / A110: Front Brake (Big Brake Assembly)
• R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
• R12 (All models) / R15TL: Front Brake
• R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake
• A310.4 (n°910 at the end of the series): Front Brake
• A310 V6 (Before 1980): Front Brake

• Thickness: 1.2mm (Original side)

Oblong “Lunules” type cylinder head gasket

• For M12 banjo bolts
• Number 70 on exploded view

Dimensions of the Large Spring:

• Outer Diameter: Ø 33.3mm
• Inner Diameter: Ø 25mm
• Wire Diameter: Ø 4.1mm
• Free Height (overall): 44.40mm

Dimensions of the Small Spring:

• Outer Diameter: Ø 23.3mm
• Inner Diameter: Ø 18.4mm
• Wire Diameter: Ø 2.40mm
• Overall height: 38.1mm

Dimensions provided for information purposes only, may vary slightly.

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.