Pair of right and left tie rods

Ideal for prepared engines or to replace a mechanical fuel pump.

• Flow rate: 130l/h
• Max pressure: 0.15bar
• Suction: -0.20bar
• 220° adjustable inlet and outlet tube: Ø 8mm
• Self-regulated fuel pump
• Dimensions: 73x126mm / Weight 820g

Ideal for vehicles with the engine in the rear position with a tank at the front, pump to be positioned in the compartment motor.

It is recommended to mount the pump horizontally, with the "Out" outlet at the top.

Pay attention to the connection polarity: red cable "+" / black cable "-"

Suitable for vehicles:

• R8 and R8G: Rear Tank
• R10: Rear Tank
• Floride S and Caravelle Coupe only (R1131): Rear Tank (Capacity 31L)
• A110: Front Tank in Manolene (Plastic)

Fuel gauge equipped with a flat terminal.

• Renault OE Ref: 8552444 / 0855244400

Filter Dimensions:

• Inner Diameter (D2): Ø 144mm
• Outer Diameter (D1): Ø 202mm
• Height (H1): 81mm
• Height (H2): 74mm

The dimensions given are for information purposes only; slight variations of a few millimeters are possible depending on availability.

- Overall length: 311 cm

- Sheath length: 299 cm

- Cable length: 311cm

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.