Set of 12 segments Ø 78 - 1.75c x 2 x 4 - 1605 cc

• Center distance between carburetor and intake pipe : 110mm and 70mm
• Flanges with tapping for a vacuum
• Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)

Suitable for:

• Box 352
• Box 364-05 / 364-06
• Box 365-00 / 365-02 / 365-05
• Box 365-10 / 365-14 / 365-20 / 365-24 /365-28 / 365-29
• Box 395
• Box 385 / NG5

• Tendeur à armement automatique par ressort
• Présence d'un orifice de graissage pour assurer la lubrification et le maintien en tension du patin contre la chaîne

• Supplied with 2 banjo bolts: M12x100 and 4 copper gaskets.

Compatible with the following vehicles:

• A310.4: From chassis no. 635 to end of series (With 2nd assembly clutch slave cylinder)
• A310 V6: All models

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 48.00mm
• Housing Diameter (B): Ø 51.60mm
• Bearing Width (C): 21.75mm
• Bearing Thickness (D): 1.77mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal

Segment Characteristics:

• • Segment Diameter: Ø 77.8mm
  • Thickness of Upper Segments (Fire-resistant): 1.75mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.