Best sellers
In stock
Ball joint: M10x125 axle - Cone Ø 11.60mm to Ø 13mm
Center distance between wishbone mounting: 42mm and 48mm
Ball joint mounting diameter: 38mm
Renault OE Ref: 0996064400
Suitable for:
R16 TS (R1151): From start to...
In stock
In stock
In stock
Possible adjustment of the hardness of the shock absorbers.
Versatile "Road" shock absorbers, ideal for use on the road and for competition.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Out of stock
Dimensions of the Large Spring:
Outer Diameter: Ø 33.3mm
Inner Diameter: Ø 25mm
Wire Diameter: Ø 4.1mm
Free Height (overall): 44.40mm
Dimensions of the Small Spring:
Outer Diameter: Ø 23.3mm
Inner Diameter: Ø...
In stock
This harness uses the color codes of the original wires and terminals,
Original gray ribbon,
Harness sold with its installation plan, all the connectors are identified and labeled.
Harness for assembly with original...
Out of stock
In stock
Thickness 1.35mm
Suitable for:
R8 (956cc) and R8 (1108cc) TS (FASA)
R4 (956cc) F4 Van (FASA)
In stock
In stock
Out of stock
Diameter of the 3 holes for the strike plate mounting screws: M8x100
In stock
In stock
In stock
In stock
In stock
Hollow piston
Banjo fixing screw: Ø7/16" - 20UNF ( inside Ø 10mm )
In stock
In stock
In stock
In stock
Male Hose End: Ø 3/8"-24UNF (Ø 9.52mm)
Female Hose End: Ø 3/8"-24UNF (Ø 9.52mm)
Overall Length: 480mm
Sold individually
Suitable for Juvaquatre (From 06/1954):
Juvaquatre (R2100): 4CV
Dauphinoise (R2101): 5HP
In stock
Supplied with x8 mounting studs and x4 O-rings (AVP4806) between the manifold and the carburetor.
Carburetor mounting stud distance: 110mm and 70mm
The carburetors are mounted directly onto the manifold. A...
In stock
In stock
Sheath length: 71.5cm (x2)
Cable length: 222.5cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OE) cables from car manufacturers.
In stock
In stock
In stock
Black base
Sold without festoon bulb: Reference AVP1820
In stock
Kit of 4 springs for locking the venturi in the body of the WEBER DCOE 40 and DCOE 45 carburetor
For first generation Caburator WEBER
In stock
HTX PRESTIGE 20W-50 is a mineral engine oil suitable
for both old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a consistent oil film, even in hot weather, to provide the best...
Out of stock
In stock
Delivered without fuses
Dimensions: Lg 185mm x W 53mm x H 43mm - Fixing distance: 175mm
Out of stock
Suitable for the following gearboxes:
Gearbox 330 / 353-03 / 353-13 / 353-33
Gearbox 352-10 / 352-11 / 352-13
Gearbox 364-05 / 364-06
In stock
Out of stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
In stock
Features:
Mounting hub 4 holes - Centering Ø 87mm
Non-ventilated discs
Suitable for:
A110.SC / SI: Rear disc
A310.4 (All models): Rear disc
In stock
In stock
In stock
R4 (Billancourt Engine): All models
OE Renault Ref: 3538607 / 0353860700 / 8577301 / 0857730100 / 7700513446
In stock
Suitable for: R4 (R1120) from n°954001 to the end R4 (R1123) from n°627132 to n°2012576 R4 (R1126) from start to #655996 R4 (R1128) from start to #60549 R4 (R2106) from n°24877 to n°246451 R4 Van (R2370) / (R2391) /...
In stock
In stock
Thickness: 1.35mm (Standard)
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.20)
Journal Diameter (A): Ø 51.47mm
Housing Diameter (B): Ø 55.88mm
Bearing Width (C): 18.68mm
Bearing Width (C): 24.68mm
Bearing Thickness (D): 2.17mm
Smooth,...
In stock
In stock
In stock
Alpine OE Ref: 7910246036 / 7910246590
In stock
This harness uses the color codes of the original wires and terminals
Harness sold with its installation plan, all the connectors are identified and labeled
Harness for mounting with original terminal boxes or modern...
In stock
In stock
In stock
Alpine OE Ref: 60000000990 / 60000000991 / 60000000992
In stock
In stock