Super 5 GT Turbo - Tie rod boot

Delivery in France only

• Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
• DOT 5 approved (not to be confused with DOT 5.1)

Directions for use:

• Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.

• Cup diameter: Ø 15.70mm

Super 5 GT Turbo

Suitable for:

• R8.G (1255cc and 1296cc Engine)
• GT4 / Matradjet (1255cc Engine)
• A110 1100G and 1300G
• A110.1600 (S / SC / SI)
• A310.4 1600VF (Injection) 
• R12G / R17G
• Super 5GT Turbo

Flexor Specifications:

• • Mounting hole spacing:4 x 50.50 mm
  • Mounting hole diameter: Ø 8.4 mm
  • Center hole diameter:Ø 10.50 mm
  • Flexor thickness: 11 mm
  • Material:Rubber flexor with metal reinforcement
  • Supplied with 4 x M8 x 20 mm screws and 4 x nylock nuts

For some assemblies with a center screw, replacing this screw with a socket head cap screw (SHCS) or modifying the flexor may be necessary.