Stabilizer bar tie rod with silent blocks - Length 19cm - A310.6 ( n°1 to 47707 )
Reference:
7343
Dimension of the axis of the upper fixing bolt at the support of the 1st washer.
€44.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
Length 190mm from the axis to the support of the 1st washer.
Customers who bought this product also bought:
&media=https://www.arnaudventouxpieces.com/5334-large_default/stabilizer-bar-tie-rod-with-silent-blocks-length-19cm-a3106-n1-to-47707-.jpg){kind=link}
Dowel Dimensions:
- Dowel Thread: M12 ((125 Pitch / Class 10.9)
- Dowel Head Diameter: Ø 19.50mm
- Dowel Recess Diameter: Ø 14.30mm
- Dowel Length Under Head: 33mm
- Dowel Overall Length: 38mm
Suitable for:
- Alpine A110 1300 / 1600: (Front and rear hubs with disc brakes)
- Alpine GT4:(Front and rear hubs with disc brakes)
- Caravelle: (R1133) / Floride (R1131):(Front and rear hubs with disc brakes)
- Dauphine: R1094 and R1095(Front and rear hubs with disc brakes)
- Matradjet:(Front and rear hubs with disc brakes)
- R8 / R10: (Front hubs with disc brakes)
- R8 G: R1135 (Front and rear hubs with disc brake)
- R12: All models (Rear hub with drum brake)
- R12 G: R1173 (Front and rear hubs with disc brake)
- R16 TS: R1151 (Rear hub with drum brake)
- R16 L/TL: R1153 (Front hub with disc brake and rear hub with drum brake)
- R17 TL: R1312 From serial number 30471 to the end of series 30470 (Front hub with disc brake and rear hub with drum brake)
- R17 TL: R1322 From serial number 2451 to the end of series 30470 Series (Front hubs with disc brake and rear hubs with drum brake)
- R17 G:(Front and rear hubs with disc brake)
In stock
In stock
In stock
Caliper equipped with square joint.
Fit on:
- Dauphine (Disc brakes)
- R8 / Caravelle / Floride S
- A110 (Small brakes mounting)
In stock
- Overall length: 301.5 cm
- Sheath length: 296 cm
- Cable length: 301.5 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
Installation orientation: The end with the two closest-spaced holes is installed on the inspection plate side (opposite the water pump).
Tube orientation: The holes must be aimed towards the valve seats at a 30° angle from the vertical.
- Tube outer diameter: Ø 14mm
- Tube length (overall): 325mm
- Material: Stainless steel
- Renault OE Ref.: 5522581 / 0555258100 / 0555465300
In stock
With location for chrome strip
In stock