Note: There are two versions of the thermostat, distinguished by the diameter of the spring seat (small or large seat).
Spring seat diameter: Ø 47.5 mm (Large seat)
Thermostat outer diameter: Ø 69 mm
Overall height:...
In stock
Best sellers
In stock
Capsule diameter Ø 55mm
The old-generation 65mm diameter capsules have been replaced by 55mm diameter models. The curve and mounting remain unchanged.
The operation of the vacuum advance is very important on certain...
In stock
This water pump support can be adapted to replace the water pump support for Renault R8 provided that certain holes are blocked
Out of stock
Out of stock
Sold in a pack of 4 slats.
Material: French beech wood (Premium quality)
Renault OE Ref.: 0857602212
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
Overall length: 215 cm
Sheath length: 201 cm
Cable length: 208 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
Segment Characteristics:
Segment Diameter: Ø 54.50 mm
Thickness of Upper Segments (Fire-resistant): 2 mm
Thickness of Intermediate Segments (Waterproof):2mm
Low ring thickness (Scraper): 3.5mm
It is essential to...
In stock
This washer is positioned on the screw opposite the eccentric nut
Thick washer M8
Washer outer diameter: Ø 23mm
Sold individually; one washer is required per side.
In stock
Suitable for:
R5 Alpine (R1223)
R5 Alpine Turbo (R122B)
Silentbloc Dimensions:
Inner Diameter (D1): Ø 37.1mm
Outer Diameter (D2): Ø 55.2mm
Height (H1): 27.1mm
Height (H2): 32.9mm
Silentbloc Rubber Hardness: 60 Shore
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Sold individualy, requires 2 pieces per carburetor
Number 32 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
This kit is composed of:
AVP 5214 Ø 25 to 40mm x16
AVP 5218 Ø 32 to 50 mm x2
In stock
Delivery in France only
Recommended paint for decorating and protecting the exhaust manifold
Resistant up to 600°C
In stock
Cylinder head gasket with cylindrical holes Ø 71mm
In stock
Convient pour:
R5 Alpine : Boite 385 (385-12 / 385-13 / 385-14 / 385-17 / 385-40)
R5 Alpine turbo : Boite NG5
R16.TX
Out of stock
In stock
Length under head: 37mm
Significantly higher strength than the original, ideal for tuned engines
In stock
Segment Characteristics:
Segment Diameter: Ø 70mm
Thickness of Upper Segments (Fire-resistant): 2mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 3.5mm
It is essential to...
In stock
Out of stock
In stock
In stock
In stock
Out of stock
Out of stock
In stock
In stock
In stock
Out of stock
The kits are supplied with the following components:
Cylinder Heads (x4)
Domed Pistons (x4)
Rings (x12)
Pin (x4)
Circle Clips (x8)
Dimensions of the various parts:
Cylinder Head Bore Diameter: Ø 74.5mm
Cylinder...
In stock
The kit contains the following studs: M6x25 x2pcs (Ref 1016060256) + M6x30 x1pcs (Ref 1016060306) + M6x45 x2pcs (Ref 7059146)
Suitable for:
4CV: Water pumps with 6 mounting holes (2nd model)
Dauphine: Ventoux engine...
In stock
Suitable for:
R5 Alpine (R1223)
R5 Alpine Turbo (R122B)
Silentbloc Dimensions:
Inner Diameter (D1): Ø 37.1mm
Outer Diameter (D2): Ø 55.2mm
Height (H1): 27mm
Height (H2): 59mm
Silentbloc Rubber Hardness: 60 Shore
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 600mm
Lift stroke: 250mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock
Kit of 4 springs for locking the venturi in the body of the WEBER DCOE 40 and DCOE 45 carburetor
For first generation Caburator WEBER
In stock
Delivery in France only
Recommended paint for decorating and protecting the exhaust manifold
Resistant up to 600°C
In stock
Master cylinder inner diameter: Ø 19mm
Outlet diameters (x3): Ø 3/8" - 24UNF (x2) and Ø 1/2"-20UNF (x1)
Renault OE part number: 7700577839 / 7700577851
Suitable for:
R12
R17
R16 TS (R1151): 3rd generation
R16 TL...
Out of stock
In stock
Suitable for Billancourt engines:
845cc engine (Type 800-1 / 800-2 / 800-3 / 800-05 / B1B-07)
The kits are supplied with the following components:
Cylinder liners (x4)
Pistons (x4)
Ring rings (x12)
Crankshaft pins...
Out of stock
In stock
Curve provided for SP95 / SP98 octane unleaded fuel
In stock
In stock
Suitable for:
Simca 1000 (6CV and 7CV): From 1968 to 1973
Simca 1200S
CG (1300)
In stock
Shipping available. Contact us to obtain a transport quote and find out our conditions.
Click HERE to write to us.
Out of stock
In stock
In stock
Wooden fuel tank support for front trunk (triangular wooden mount with 3 mounting tabs) – R8 Gordini
Wooden triangle sold with a set of metal mounting brackets (x3)
Material: French beech wood (premium quality)
In stock
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
Out of stock
Dimension of the collar: Ø 54mm
In stock
In stock
Yellow clip-on cap / Synthetic material
Fits with H4 / P45t - H4 / P43t bulbs
Bulb references: AVP 4752 / AVP 4762 / AVP 4746
Sold individually without bulb
Please check compatibility with your vehicle
In stock
Suitable for GOTTI rims or hubs
Fits a 60mm mounting diameter on the rim side
Cap outer diameter: Ø 64.5 mm
In stock
Fuel pressure gauge kit.
Allows fuel pressure adjustment with the "King" filter REF 6825.
Graduation from 0.20g up to 1 bar.
With connector and clamp for 6 or 8 diameter flexible hoses.
The pressure gauge can be...
In stock
In stock
In stock
For interior door, sold in pairs (right and left)
Out of stock
sold with the water pump joint
In stock
For clutch mechanism without diaphragm
In stock
In stock
Stainless steel airbox: high corrosion resistance and durability
In stock
In stock
In stock
Segment Characteristics:
Segment Diameter:Ø 79mm
Thickness of Upper Segments (Fire-resistant): 1.75mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 4mm
It is essential to...
In stock