Rubber Accelerator Pedal Pad - R4 / 4L (All Models)

Delivery in France only

• Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
• DOT 5 approved (not to be confused with DOT 5.1)

Directions for use:

• Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.

Delivered without fuses

Dimensions: Lg 118mm x W 53mm x H 43mm - Fixing distance: 107mm

• To wrap around an R4/4L, six meters of reed are needed, with about 30 cm of margin.

• R4 / 4L: Box354 / HA0-119 / HA0-164 / HA0-166
• R5: BoxHA1

Needle 1.25

Brake Disc Specifications:

• Outer Diameter: Ø 228mm
• Inner Centering Diameter: Ø 83mm
• Mounting Hole Spacing: 49.5mm
• Mounting with 6 Bolts: M8x125
• Disc Offset: 28.5mm
• Brake Disc Thickness: 10mm (Solid Discs)
• Sold in pairs (2 discs)

Important Brake discs have a specific mounting direction that must be respected; They are not interchangeable.

Mounting direction of a solid, non-ventilated brake disc : Discs must be installed so that the edge of the grooves closest to the outer edge of the disc makes contact with the brake pad first.

For competition use only; do not use these discs on public roads.

Suitable for:

• R4 Saloon / Van F4 and F6 / Rodeo : Front disc
• R5 Alpine (1223): Disc front
• R5 Alpine Turbo (122B) / Alpine Coupe / GR2: Rear disc
• R12 / R15TL: Front disc
• R12G / R17G / R17TS: Rear disc

Suitable for vehicles:

• 4CV / Juvaquatre: Type 662 Engine (From June 1956)
• Dauphine / Dauphinoise / Estafette / Floride A106 / A108: Type 670 Engine
• R4: Billancourt Type 800-02/05 Engine (From 1962)

Bearing Dimensions:

• Dimensions: Original (Standard) Dimensions
• Crankpin Diameter (A): Ø 38.00mm
• Housing Diameter (B): Ø 41.14mm
• Bearing Width (C): 21.18mm
• Bearing Thickness (D): 1.57mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material: Bimetal