Out of stock
Best sellers
White zinc-plated brass solid washer for countersunk screws
Ideal for securing:
Headlining
Interior trim, carpets, rugs ...
Rubber mats
In stock
This ignition harness consists of4 spark plug wires and 1 coil wire.
We would like to point out that our spark plug wires are made with Ø 7 mm silicone wires, black in color, with a standard copper core (wire...
In stock
Not suitable for replacing the original ball joint bellows
In stock
In stock
Cap Dimensions:
Inner Diameter: Ø 40mm
Outer Diameter: Ø 42mm
Height: 26.5mm
Also suitable for some R16 (R1150) models with rear drum brakes.
In stock
Angled hose outlet: Ø 3/8" - 24UNF (Ø 9.52mm)
Suitable for:
4CV: Right Rear Brake (From early 1956 to the end)
Dauphine / Floride: Right Rear Brake
Alpine A106 / A108: Right Rear Brake
In stock
Renault OE ref: 7700519170 / 7700638870 /7700676150 / 7701348231 /7701616841
OE Simca Ref: 40231D
In stock
Angled hose outlet: Ø 3/8" - 24UNF (Ø 9.52mm)
Suitable for:
4CV: Left Rear Brake (From early 1956 to the end of production)
Dauphine / Floride: Left Rear Brake
Alpine A106 / A108: Left Rear Brake
In stock
In stock
Suitable for:
A110.1600 SC / SI (VD) / SX (VH)
A310.4
A310 V6 (Before and after 1980): From n°43796 to end of series.
R5 Turbo
Out of stock
Angled hose outlet: Ø 3/8" - 24UNF(Ø 9.52mm)
Suitable for:
4CV: Right Front Brake (Early 1956 to Late)
Dauphine / Floride : Left Front Brake
R8 (drum brake): Left Rear Brake
In stock
The hose outlet is oblique: Ø 3/8" - 24UNF(Ø 9.52mm)
Suitable for:
4CV: Front Left Brake (From early 1956 to late 1956)
Dauphine / Floride : Front Right Brake
R8 (Drum Brake): Rear Right Brake
In stock
Out of stock
Out of stock
Réf OE lpine / Renault : 0608269300 / 6000002175 / 7700501028
In stock
TRW paste is used for the repair, assembly, and preservation of hydraulic brake components—such as brake calipers—that require special greases for reassembly.
Compatible with all brake fluids for the installation of...
In stock
These bushings replace the original bushings; no modifications are required.
In stock
Brake Disc Specifications:
Outer Diameter: Ø 260mm
Inner Centering Diameter: Ø 60mm
Mounting Hole Spacing: 71mm
Disc Offset: 32mm
Brake Disc Thickness: 8mm
In stock
In stock
In stock
In stock
In stock
Suitable for:
Dauphine R1094 / R1095 (Disc Brake)
Caravelle / Floride (Disc Brake)
R8G (Disc Brake)
Alpine A108 / GT4 (Disc Brake)
Alpine A110
Simca 1000 / 1000Coupé / 1200S / R1 / R2 / R3 / CG: Front and Rear...
In stock
In stock
Suitable for:
R8.G (1255cc and 1296cc Engine)
A110 1100G and 1300G
GT4 / Matradjet (1255cc Engine)
R12.G / R17.G (1600cc Engine)
Super 5GT Turbo and R11 Turbo: Cooler spark plug (1400cc Turbo Engine)
In stock
Useful length (L on photo diagram number 3): 19.5mm
Sold with the pin
OE Renault / Alpine Ref: 0705322000
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
Thread (master cylinder side): M16x150
Nozzle (rubber hose connection side): Ø 10mm
In stock
Convient pour les boites de vitesse type : 289 / 314 /316 / 318 /325
Out of stock
Specialized valve stem seals for 6mm diameter valves
Valve stem seal dimensions: Ø 5.5x11mm
Material: Specialized rubber
In stock
In stock
In stock
Suitable for:
Dauphine (All models): Drum brake
Florida / Alpine A108: Drum brake
In stock
In stock
In stock
Kit specifications (Tie rods / Ball joints and boots):
Ball joint taper diameter (Steering knuckle side): Top of taper Ø 11mm / Bottom of taper Ø 12mm
Ball joint taper stud thread diameter: M10 x 1.25 (right-hand...
In stock