In stock
Ball bearing for diaphragm mechanism
Reference:
4111
- Renault OE ref: 7700519170 / 7700638870 /7700676150 / 7701348231 /7701616841
- OE Simca Ref: 40231D
€18.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
Customers who bought this product also bought:
- Delivery in France only
- Epoxy coating for the interior of the engine block.
- 0.5 kg of resin and hardener + 0.5 l of thinner
.jpg)
In stock
- For caliper brand: ATE
- Caliper seal Ø 6x10mm
In stock
For 956cc (Type C1C-08 and 689-10) high compression engine (Compression ratio 9.25:1)
Suitable for:
- R4
- R5: TL / Company (After 1972)
The kits are supplied with the following:
- Crankcases (x4)
- Pistons (x4)
- Rings (x12)
- Crankpins (x4)
Dimensions of the various parts :
-
- Cylinder bore diameter: Ø 65mm
- Cylinder flange or top diameter (D): Ø 85.80mm
- Cylinder base diameter (A): Ø 75.50mm
- Cylinder height (including skirts, overall) (C): 135mm
- Height from the top of the cylinder to the base gasket area (E): 94.85mm
- Shaft dimensions: Ø 18x57mm (Circlip-free mounting)
- Segment thickness :1.75mm / 2mm / 3.5mm(Fireproof/Sealing/Scraper)
- Base gasket type: Paper gasket
Piston mounting direction: An arrow drawn perpendicular to the piston axis is marked on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).
It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values specified by the manufacturer or given in the supplied instructions.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals.
In stock
In stock
Neoprene-type contact adhesive in spray form, extra-strong. It adheres to many materials such as leather, fabrics, plastic, woodwork, etc. Allows simple, rapid, precise, and durable bonding of materials. Applies as a transparent film.
Packaged in an aerosol can with a multidirectional nozzle, it allows for fine, medium, and wide sprays, making it possible to spray all surfaces.
Application:
- Glue from a distance of 20-25 cm on previously degreased surfaces.
- Wait approximately 2 minutes before bringing the two surfaces into contact.
- Press the parts briefly and firmly after joining.
Technical specifications:
- Brand: Restom
- Model: NéoSpray Glue
- Capacity: 400ml
- Coverage: approximately 5 m²
- Resists up to 80°C continuously and 100°C peaks
Shipping possible only in mainland France
In stock
