Click for more products.
No products were found.
Click for more products.
No products were found.
×
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 1
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 2
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 3
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 1
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 2
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 3
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 1
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 2
Front wheel cylinder (oblique exit) - Ø 22mm - 4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left - 3

Front wheel cylinder(oblique outlet)-Ø22mm-4CV Front Right (From the beginning of 1956 to the end) / Dauphine Front Left / R8

Reference:
1416
  • Angled hose outlet: Ø 3/8" - 24UNF(Ø 9.52mm)

Suitable for:

  • 4CV: Right Front Brake (Early 1956 to Late)
  • Dauphine / Floride : Left Front Brake
  • R8 (drum brake): Left Rear Brake
Read moreShow less
€24.17
Order before 1pm and enjoy same day shipping !
In stock
Product Details
1416
Customers who bought this product also bought:
Set of 16 segments Ø 54.5mm - 2Cx2x2x3.5 - 1 Set of 16 segments Ø 54.5mm - 2Cx2x2x3.5 - 1

Segment Characteristics:

    • Segment Diameter:Ø 55.8mm
    • Thickness of Upper Segments (Fire-resistant): 2mm
    • Thickness of Intermediate Segments 1 (Waterproof): 2mm
    • Thickness of intermediate rings2 (Sealing): 2mm
    • Thickness of lower rings (Scraper): 3.5mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the valuesgiven by the manufacturer or data in the supplied instructions.

During assembly, the piston ring gaps must be evenly distributed around the piston circumference at 120° intervals.

Reference: 1003
€65.00
Add to cart
In stock
1

Please sign in first.

Sign in