U-joint window support - sold by the meter - ref 6000000129

• Sold with 3 fixing screws and the oil seal (Ø 17x30x7mm)
• Guide to be mounted when replacing a clutch with a graphite thrust bearing with a modern diaphragm clutch
• It is necessary to drill and tap in the clutch bell to mount the adaptation guide.
• Mounting instructions supplied with the kit

Fan trigger temperature 82°C

Fan stop temperature 72°C

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 48.00mm
• Housing Diameter (B): Ø 51.60mm
• Bearing Width (C): 21.75mm
• Bearing Thickness (D): 1.77mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal

• This harness uses the color codes of the original wires and terminals
• Harness sold with its installation plan, all the connectors are identified and labeled
• Harness for mounting with original terminal boxes or modern fuse box (Type AVP8717, Not supplied with the harness)
• Harness equipped to allow the mounting of a cooling radiator at the front or rear