Rear axle R8 / R8S / R8G
Our spare parts for the rear axle of the Renault R8 / R8S / R8G
Discover here a wide choice of parts to maintain or restore the rear axle of your Renault R8 / R8S / R8 Gordini.
Whether you are looking for shock absorbers, suspension springs, bellows, strap, silentbloc of gearbox, engine mount, reinforcement of crossmember, anti-roll bar, stud, wheel nut...at AVP, Arnaud Ventoux Pièces, you will find everything you need to breathe new life into your old with quality components.
Metal band hose clamp with pin lock
Metal band width: 9 mm
Clamp length: 500 mm
Maximum diameter: Ø 150 mm
In stock
In stock
Trumpet Thimble Dimensions:
Inner Diameter: Ø 20.4mm
Outer Diameter: Ø 30.00mm
Overall Height: 22.80mm
Shoulder Outer Diameter: Ø 33.90mm
Shoulder Height: 3.60mm
Sold in pairs
In stock
In stock
In stock
In stock
In stock
In stock
AVP recommends the reinforced gearbox side silentblocks Ref 4305, for reasons of reliability and ease of assembly.
In stock
These bushings replace the original bushings; no modifications are required.
Out of stock
In stock
In stock
In stock
Out of stock
In stock
In stock
Can also fit on Caravelle and Floride S trumpets
In stock
Lower mounting eye width: 21mm
Lower mounting eye inner diameter: Ø 9mm
In stock
Lower fixing eye width 21mm
Lower fixing screw Ø 9mm
In stock
Lower fixing eye width 25.8mm
Lower fixing screw Ø 10mm
In stock
These twin-tube hydraulic shock absorbers are designed for normal road use.
With a comfort setting close to the original shock absorbers, these are perfect for everyday use.
Features:
Mounting eye width: 21mm
Lower...
In stock
These twin-tube hydraulic shock absorbers are designed for versatile use, including road and rally driving.
With a firmer damping than standard shock absorbers, they are perfect for sportier driving while still...
In stock
These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.
With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty...
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Suitable for:
Dauphine R1094 / R1095 (Disc Brake)
Caravelle / Floride (Disc Brake)
R8G (Disc Brake)
Alpine A108 / GT4 (Disc Brake)
Alpine A110
Simca 1000 / 1000Coupé / 1200S / R1 / R2 / R3 / CG: Front and Rear...
In stock
Hub Specifications:
Outer Diameter: Ø 180mm
Wheel Stud Bolt Hole Spacing: 3x130mm
Wheel Stud Hole Diameter: Ø 13.4mm
Wheel Stud Bolt Hole Spacing: 3x130mm
Original type hub with 10 splines
Hub sold without wheel...
In stock
ATTENTION: Suitable for mounting "small" original brakes with original caliper and brake disc
Kit for mounting large wheel bearings on the rear axle, including:
2 Bearing carriers machined from 42CrMo4 hardened and...
Out of stock
ATTENTION: Suitable for "large" brake mounting with a 12mm thick disc and a non-offset brake caliper bracket identical to REF AVP 4377.
Kit for mounting large wheel bearings on the rear axle, including:
2 Bearing...
Out of stock
In stock
Overall length 84mm
Ø10mm
Ref 0607982400 / 6079824
In stock
In stock
In stock
Renault OE Ref: 1081200866
In stock
In stock
In stock
In stock
Out of stock
In stock
In stock
Out of stock
In stock
In stock
Out of stock
In stock
In stock
In stock
This bracket attaches to the gearbox studs
Renault and Alpine OE part number:0555617900
In stock
