Trumpet strap - width 30mm - thickness 7.5 mm

• Length under the head of the threaded part: 30mm

Supplied with carburetor needle valve: 1.5

Suitable for carburetor:

• Solex 32 DISTA
• Solex 32 PDIST
• Solex 32 DITA-3

Kit contents:

• Gearbox mounting studs (x4): M10x50mm
• Crossmember mounting bolts (x8): M8x40mm
• Aluminum spacers for gearbox bracket (x2): Thickness 12mm / Hole spacing 65mm
• Aluminum spacers for crossmember (x4): Thickness 12mm / Hole spacing 40mm

Bearing Dimensions:

• Dimension: Repair Dimension (+0.50)
• Junnel Diameter (A): Ø 39.50mm
• Housing Diameter (B): Ø 44.01mm
• Bearing Width (C): 27.13mm (x2)
• Bearing Width (C): 30.12mm (x2)
• Bearing Width (C): 32.87mm (x2)
• Bearing Thickness (D) : 2.24mm
• Smooth, lug-type bearings with grease holes (x4) and grooves (x6)
• Bearing material: Bi-metal

• Simca OE Ref: 29932M

Suitable for (Engine Type 688 / 689 / 810):

• • R4 / R6 / R8
  • Caravelle - Matra Jet
  • R12.TL - R12.TS - R15.TL
  • A110.V85 (810) - A110.GT4

This distributor must be used with a coil with a primary resistance between 2.5 and 3.5 ohms.

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.