Click for more products.
No products were found.
Click for more products.
No products were found.
×
Rear shock absorber spacer - Ref 0608388500 - 1
Rear shock absorber spacer - Ref 0608388500 - 1
Rear shock absorber spacer - Ref 0608388500 - 1

Rear shock absorber spacer - Ref 0608388500

Reference:
6375
  • Inner diameter: Ø 9mm
  • Thickness: 9mm
Read moreShow less
€2.50 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
6375
You may also like
Pair of rear shock absorbers - Koni adjustable - R8G / A110 - 1 Pair of rear shock absorbers - Koni adjustable - R8G / A110 - 1

These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.

With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.

Features:

  • Mounting eye width: 21mm
  • Lower mounting eye inner diameter: Ø 9mm
  • The internal adjustment allows you to modify the rebound damping of the shock absorber.
  • Shock absorbers delivered at minimum spring rate (fully open, i.e., softest setting)
  • Shock absorbers sold in pairs

Suitable for:

  • R8G (R1134 / R1135): From 10/1964 to 1974
  • Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
  • Alpine GT4 (For rear crossmember with 4 shock absorbers)
  • Florida S and Caravelle:From 06/1964 onwards... (For rear crossmember with 4 shock absorbers)

Detailed description of Koni shock absorbers,see below

Reference: 4382
€360.00 (tax incl.)
Add to cart
In stock
Pair of "Standard Calibration" rear shock absorbers - R8.G / Alpine A110 (Rear cross member 4 shock absorbers) - 1 Pair of "Standard Calibration" rear shock absorbers - R8.G / Alpine A110 (Rear cross member 4 shock absorbers) - 1

These twin-tube hydraulic shock absorbers are designed for normal road use.

With a comfort setting close to the original shock absorbers, these are perfect for everyday use.

Features:

  • Mounting eye width: 21mm
  • Lower mounting eye inner diameter: Ø 9mm
  • Shock absorbers sold by pair

Suitable for:

  • R8G (R1134 / R1135): From 10/1964 to 1974
  • Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
  • Alpine GT4 (For rear crossmember with 4 shock absorbers)
  • Floride S and Caravelle: From 06/1964 to the end... (For rear crossmember with 4 shock absorbers)
Reference: 4318
€164.00 (tax incl.)
View more
Out of stock
Customers who bought this product also bought:
Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX) - 1 Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX) - 1

Suitable for vehicles with 1397cc engines (Type 847.20, C1J, C2J, C3J):

    • R5 TS / TX / GTL / Automatic / USA
    • R11 L / TL / TLE
    • R18 TL / GTL
    • Fuego / Express

Kits are supplied with the following:

    • Cylinder Cylinders (x4)
    • Pistons (x4)
    • Ring Rings (x12)
    • Crankshafts (x4)

Dimensions of the different parts:

  • Bore diameter of the cylinder liners: Ø 76mm
  • Flange or top diameter of the cylinder liners (D): Ø 90.10mm
  • Base diameter of the cylinder liners (A): Ø 80.60mm
  • Overall height of the cylinder liners (C), including skirts: 134mm
  • Height from the top of the cylinder liner to the base gasket area (E): 95mm
  • Dimensions of the shafts: Ø 20 x 63.50 mm (Cirlip-free mounting)
  • Segment thickness: 1.75 mm / 2 mm / 4 mm (Fireproof/Sealing/Scraper)
  • Base gasket type: O-ring

Piston mounting direction: an arrow drawn perpendicular to the piston axis is shown on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).

It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals. 

Reference: 5099
€430.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in