In stock
Pair of rear shock absorbers "Standard setting" - R8G / Alpine A110 (For rear crossmember with 4 shock absorbers)
Reference:
4318
These twin-tube hydraulic shock absorbers are designed for normal road use.
With a comfort setting close to the original shock absorbers, these are perfect for everyday use.
Features:
- Mounting eye width: 21mm
- Lower mounting eye inner diameter: Ø 9mm
- Shock absorbers sold by pair
Suitable for:
- R8G (R1134 / R1135): From 10/1964 to 1974
- Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
- Alpine GT4 (For rear crossmember with 4 shock absorbers)
- Floride S and Caravelle: From 06/1964 to the end... (For rear crossmember with 4 shock absorbers)
€164.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
Customers who bought this product also bought:
The kits are supplied with the following components:
- Cylinder Heads (x4)
- Domed Pistons (x4)
- Rings (x12)
- Pin (x4)
- Circle Clips (x8)
Dimensions of the various parts:
-
- Cylinder Head Bore Diameter: Ø 75.7mm
- Cylinder Head Flange or Top Diameter (D): Ø 89.75mm
- Cylinder Head Base Diameter (A): Ø 80mm
- Overall height including skirts of cylinder liners (C): 128mm
- Height from top of cylinder liner to base seal area (E): 94.80mm
- Shaft dimensions: Ø 20x63.5mm (Cirlip-free mounting)
- Ring thickness: 1.75mm / 2mm / 4mm (Fireproof/Sealing/Scraper)
- Base seal type: Paper gasket
Piston mounting direction: (arrow) drawn perpendicular to the axis of the piston, figure on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).
It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals.
Out of stock
In stock
![](http://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.arnaudventouxpieces.com%2Fen%2Fpair-of-standard-calibration-rear-shock-absorbers-r8g-alpine-a110-rear-crossmember-4-shock-absorbers-663.html&description=Pair of rear shock absorbers "Standard setting" - R8G / Alpine A110 (For rear crossmember with 4 shock absorbers)&media=https://www.arnaudventouxpieces.com/6242-large_default/pair-of-standard-calibration-rear-shock-absorbers-r8g-alpine-a110-rear-crossmember-4-shock-absorbers.jpg){kind=link}
- Black polyurethane adhesive for rubber seals
- High adhesion, temperature resistant up to 90°
.jpg)
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and burst pressure 138 bar
In stock
- Fuel pressure gauge kit.
- Allows fuel pressure adjustment with the "King" filter REF 6825.
- Graduation from 0.20g up to 1 bar.
- With connector and clamp for 6 or 8 diameter flexible hoses.
- The pressure gauge can be removed after adjustment and the cap provided in the kit can be screwed on for greater privacy in the engine compartment.
In stock
- Overall length: 202cm
- Sheath 1 length: 91cm
- Sheath 2 length: 82cm
- Cable length: 190cm
Suitable for:
- A110.1100 VA and VB
- A110.1300 VA and VB
- A110 1300 VC (V85)
Our cables are made in France and meet the assembly and quality standards of first-class cables Original equipment from car manufacturers.
In stock