R5 Alpine Atmo engine (1223) - 1397cm³ engine (type 840-25)

Our spare parts for the engine of your Renault 5 Alpine Atmo

Discover here our wide selection of spare parts available to restore or maintain:

the 1397cm³ (type 840-25) engine of your Renault 5 Alpine Atmo (1223)

Whether you are looking for: engine piston, liner, ring, crankshaft bearing, connecting rod bearing, side shims, engine gasket kit, base gasket, rocker cover, cylinder head gasket, pinion, distribution, timing chain, inlet valve, exhaust valve, manifold gasket, crankcase, chain tensioner .... At AVP Arnaud Ventoux Pièces, we have everything you need to restore your Renault 5 Alpine Atmo or Renault 5 Alpine Turbo collection with quality components.

Read moreShow less

Home
>
Renault
>
R5 Alpine / Turbo / GT Turbo
>
R5 / R5 Alpine Atmo / R5 Alpine Turbo engine
>
R5 Alpine Atmo engine (1223) - 1397cm³ engine (type 840-25)

R5 / R5 Alpine Atmo / R5 Alpine Turbo engine

Purchase a gift voucher

Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX) - 1

Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX) - 1

Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX)

Suitable for vehicles with 1397cc engines (Type 847.20, C1J, C2J, C3J): R5 TS / TX / GTL / Automatic / USA R11 L / TL / TLE R18 TL / GTL Fuego / Express Kits are supplied with the following: Cylinder...

Reference: 5099

€430.00 (tax incl.)

In stock

Set of liners and pistons Ø 76mm with pin and segment - R5 Alpine (1223) - 1397cc engine (Type 840.25) - 1

Set of liners and pistons Ø 76mm with pin and segment - R5 Alpine (1223) - 1397cc engine (Type 840.25) - 1

Set of liners and pistons Ø 76mm with pin and segment - R5 Alpine (1223) - 1397cc engine (Type 840.25)

The sets are supplied with the following components: Liners (x4) Pistons (x4) Rings (x12) Pin (x4) Dimensions of the various parts: Liner bore diameter: Ø 76mm Liner flange or top diameter (D): Ø 90.10mm Liner...

Reference: 5001

€396.00 (tax incl.)

In stock

Set of 12 segments Ø 76mm - 1.75Cx2x4 - 1

Set of 12 segments Ø 76mm - 1.75Cx2x4 - 1

Set of 12 segments Ø 76mm - 1.75Cx2x4

Reference: 5002

€94.00 (tax incl.)

Out of stock

Kit of 4 "genuine GS" cast iron liners Ø 76mm - 1400cc engine - 1

Kit of 4 "genuine GS" cast iron liners Ø 76mm - 1400cc engine - 1

Kit of 4 "genuine GS" cast iron liners Ø 76mm - 1400cc engine

Reference: 5013

€620.00 (tax incl.)

In stock

Kit of 4 liner base O-rings Ø 77.2mm - 1

Kit of 4 liner base O-rings Ø 77.2mm - 1

Kit of 4 liner base O-rings Ø 77.2mm

For piston kit liner Ø 76mm (AVP5001 and AVP5050)

Reference: 5012

€11.00 (tax incl.)

In stock

Set of connecting rod bearings Ø 43.98 mm - STD (Original dimension) - 1

Set of connecting rod bearings Ø 43.98 mm - STD (Original dimension) - 1

Connecting rod bearing set (Large bearings) Ø 43.98mm - STD (Original dimension)

Bearing Dimensions: Dimension: Original (Standard) Dimension Crankpin Diameter (A): Ø 43.98mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 17.75mm Bearing Thickness (D): 1.80mm Smooth, lug-type bearings with no...

Reference: 6016

€44.00 (tax incl.)

In stock

Set of connecting rod bearings Ø 43.73mm - Repair dimension (+0.25) - 1

Set of connecting rod bearings Ø 43.73mm - Repair dimension (+0.25) - 1

Set of connecting rod bearings (Large levels) Ø 43.73mm - Repair dimension (+0.25)

Bearing Dimensions: Dimension: Repair Dimension (+0.25) Crankpin Diameter (A): Ø 43.73mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 17.75mm Bearing Thickness (D): 1.92mm Smooth, lug-type bearings with no...

Reference: 6017

€44.00 (tax incl.)

In stock

Set of connecting rod bearings Ø 43.48mm - Repair dimension (+0.50) - 1

Set of connecting rod bearings Ø 43.48mm - Repair dimension (+0.50) - 1

Connecting rod bearing set (Large bearings) Ø 43.48mm - Repair dimension (+0.50)

Bearing Dimensions: Dimension: Repair Dimension (+0.50) Crankpin Diameter (A): Ø 43.48mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 17.75mm Bearing Thickness (D): 2.05mm Smooth, lug-type bearings with no...

Reference: 6018

€44.00 (tax incl.)

In stock

Set of connecting rod bearings Ø43.23mm - Repair dimension (+0.75) - 1

Set of connecting rod bearings Ø43.23mm - Repair dimension (+0.75) - 1

Connecting rod bearing set (Large bearings) Ø 43.23mm - Repair dimension (+0.75)

Bearing Dimensions: Dimension: Repair Dimension (+0.75) Crankpin Diameter (A): Ø 43.23mm Housing Diameter (B): Ø 47.62mm Bearing Width (C): 17.75mm Bearing Thickness (D): 2.18mm Smooth, lug-type bearings with no...

Reference: 6001

€45.00 (tax incl.)

In stock

Set of crankshaft main bearings Ø 54.80mm (large bearings) - STD (Original dimension) - 1

Set of crankshaft main bearings Ø 54.80mm (large bearings) - STD (Original dimension) - 1

Jeu de coussinets paliers de vilebrequin Ø 54.80mm (Gros paliers) - STD ( Côte origine )

Bearing Dimensions: Dimension: Stock dimension (Standard) Journal Diameter (A): Ø 54.80mm Housing Diameter (B): Ø 58.75mm Bearing Width (C): 19.50mm Bearing Thickness (D): 1.95mm Smooth, lug-type bearings with grease...

Reference: 6019

€48.00 (tax incl.)

In stock

Set of crankshaft main bearings Ø 54.55mm (large bearings) - Repair dimension (+0.25) - 1

Set of crankshaft main bearings Ø 54.55mm (large bearings) - Repair dimension (+0.25) - 1

Set of crankshaft bearings Ø 54.55mm (Large bearings) - Repair dimension (+0.25)

Bearing Dimensions: Dimension: Repair dimension (+0.25) Junnel Diameter (A): Ø 54.55mm Housing Diameter (B): Ø 58.75mm Bearing Width (C): 19.50mm Bearing Thickness (D): 2.07mm Smooth, lug-type bearings with grease...

Reference: 6020

€49.00 (tax incl.)

In stock

Set of crankshaft main bearings Ø 54.3mm (large bearings) - Repair dimension (+0.50) - 1

Set of crankshaft main bearings Ø 54.3mm (large bearings) - Repair dimension (+0.50) - 1

Set of crankshaft bearings Ø 54.3mm (Large bearings) - Repair dimension (+0.50)

Reference: 6021

€49.00 (tax incl.)

In stock

Set of crankshaft main bearings Ø54.05mm (large bearings) - Repair dimension (+0.75mm) - 3

Set of crankshaft main bearings Ø54.05mm (large bearings) - Repair dimension (+0.75mm) - 3

Crankshaft bearing set Ø54.05mm (Large bearings) - Repair dimension (+0.75)

Bearing Dimensions: Dimension: Repair Dimension (+0.75) Junnel Diameter (A): Ø 54.05mm Housing Diameter (B): Ø 58.75mm Bearing Width (C): 19.50mm Bearing Thickness (D): 2.32mm Smooth, lug-type bearings with grease...

Reference: 6002

€52.00 (tax incl.)

In stock

Set of side shims (large bearings) - Thickness 2.85mm (STD Original dimension) - 1

Set of side shims (large bearings) - Thickness 2.85mm (STD Original dimension) - 1

Set of side shims (Large bearings) - Thickness 2.80mm (STD Original dimension) - Ref 7701454038

Reference: 6050

€13.00 (tax incl.)

In stock

Set of side shims (large bearings) - Thickness 2.90mm (Repair dimension + 0.05mm) - 1

Set of side shims (large bearings) - Thickness 2.90mm (Repair dimension + 0.05mm) - 1

Set of side shims (Large bearings) - Thickness 2.85mm (Repair dimension + 0.05mm) - Ref 7701454049

Reference: 60141

€14.00 (tax incl.)

Out of stock

Set of side shims (large bearings) - Thickness 2.95mm (Repair dimension + 0.10mm) - 1

Set of side shims (large bearings) - Thickness 2.95mm (Repair dimension + 0.10mm) - 1

Set of side shims (Large bearings) - Thickness 2.90mm (Repair dimension + 0.10mm) - Ref 7701454050

Reference: 6022

€14.00 (tax incl.)

In stock

Set of side shims (large bearings) - Thickness 3.10mm (repair dimension + 0.25mm) - 1

Set of side shims (large bearings) - Thickness 3.10mm (repair dimension + 0.25mm) - 1

Set of side shims (Large bearings) - Thickness 2.95mm (Repair dimension + 0.15mm) - Ref 7701454051

Reference: 6083

€14.00 (tax incl.)

Out of stock

Original flywheel screw M9x100 - ref 7700854191 - 1

Original flywheel screw M9x100 - ref 7700854191 - 1

Original flywheel screw M9x100 - ref 7700854191

Reference: 6056

€6.50 (tax incl.)

In stock

Shaft pinion centering ring in engine flywheel - ref 6045759 - 1

Shaft pinion centering ring in engine flywheel - ref 6045759 - 1

Self-lubricating bronze centering ring in flywheel (Ø 12x16x20mm) - ref 6045759 / 7700553174

Reference: 4101

€5.50 (tax incl.)

In stock

Starter crown on flywheel: inner Ø 220mm - outer Ø 247mm - thickness 9mm - 1

Starter crown on flywheel: inner Ø 220mm - outer Ø 247mm - thickness 9mm - 1

Starter crown on flywheel: Inner Ø 220mm - Outer Ø 247mm - Ref 7700520332 / 0555482400 / 5554824

Inner Diameter: Ø 220mm Outer Diameter: Ø 247mm Thickness: 8mm Number of Teeth: 117 Teeth Réf OE Renault / Alpine : 7700520332 / 0555482400 / 5554824 Suitable for vehicles: R4 / 4L: Type R1128 / R1129 - Engine...

Reference: 8012

€39.00 (tax incl.)

In stock

Intake valve Ø38.8x8mm - 1

Intake valve Ø38.8x8mm - 1

Intake valve Ø38.8x8mm

Valve with high keyway

Reference: 5025

€22.00 (tax incl.)

In stock

Exhaust valve Ø 34.5x8x108mm - 1

Exhaust valve Ø 34.5x8x108mm - 1

Exhaust valve Ø 34.5x8x108mm

Valve with high keyway

Reference: 5026

€22.00 (tax incl.)

In stock

Kit of 16 valve half moons Ø 8mm - 1

Kit of 16 valve half moons Ø 8mm - 1

Kit of 16 valve half moons Ø 8mm

Suitable for valves with a groove in the upper position (type KK) and for stem diameter 8mm

Reference: 60142

€27.00 (tax incl.)

In stock

Steel exhaust valve guide - Ø 6x13.5x40mm - 1

Steel exhaust valve guide - Ø 6x13.5x40mm - 1

Steel Intake Valve Guide - Ø 8x13.15x40.0mm (Standard Size) - Ref 7701452333

Reference: 6081

€12.00 (tax incl.)

In stock

Steel intake valve guide - Ø 7x13.15x49.1mm - 1

Steel intake valve guide - Ø 7x13.15x49.1mm - 1

Steel Exhaust Valve Guide - Ø 8x13.15x49.0mm (Standard Size) - Ref 0710942500

Reference: 6080

€12.00 (tax incl.)

In stock

Bronze intake valve guide - Ø 8x13.2x40mm - 1

Bronze intake valve guide - Ø 8x13.2x40mm - 1

Bronze intake valve guide - Ø 8x13.20x40mm (Repair size)

Reference: 5021

€14.50 (tax incl.)

In stock

Bronze exhaust valve guide Ø 8x13.2x48.8 - 1

Bronze exhaust valve guide Ø 8x13.2x48.8 - 1

Bronze exhaust valve guide Ø 8x13.20x49.0mm (Repair size)

Reference: 5040

€14.50 (tax incl.)

In stock

Set of 8 bronze valve guides (4 inlet and 4 exhaust) - 1

Set of 8 bronze valve guides (4 inlet and 4 exhaust) - 1

Set of 8 bronze valve guides (4 intake Ø 8x13.20x40mm and 4 exhaust Ø 8x13.20x49mm) - Repair size

Reference: 60125

€108.00 (tax incl.)

In stock

Set of 8 valve springs - 1

Set of 8 valve springs - 1

Kit of 8 reinforced valve springs (1400cc engine) - R5 Alpine / R5 Alpine Turbo

Dimensions of the Large Spring: Outer Diameter: Ø 33.3mm Inner Diameter: Ø 25mm Wire Diameter: Ø 4.1mm Free Height (overall): 44.40mm Dimensions of the Small Spring: Outer Diameter: Ø 23.3mm Inner Diameter: Ø...

Reference: 5051

€149.00 (tax incl.)

In stock

Kit of 16 valve spring washers (1400cc engine) - Ref 7703053261 (8 pieces) and Ref 7703053158 (8 pieces) - 1

Kit of 16 valve spring washers (1400cc engine) - Ref 7703053261 (8 pieces) and Ref 7703053158 (8 pieces) - 1

Kit of 16 valve spring washers (1400cm³ engine) - Ref 7703053261 (8 pieces) and Ref 7703053158 (8 pieces)

Reference: 5008

€98.00 (tax incl.)

In stock

Short inlet push rod - 1

Short inlet push rod - 1

Original "Admission" rocker rod (Length 177mm Ø 6.5mm) - R5 Alpine (R1223) - Ref 7700621692

Sold individually

Reference: 5033

€14.00 (tax incl.)

Out of stock

"Intake" short push rod (Length 178mm Ø 6.3mm) - 1

"Intake" short push rod (Length 178mm Ø 6.3mm) - 1

"Admission" rocker rod (Length 178mm Ø 6.5mm) - R5 Alpine (Prepared Engine) / R5 Alpine Turbo - Ref 6001000492

Suitable for: R5 Alpine Atmo (1223) with prepared camshaft and engine R5 Alpine Turbo (122B) R5 Turbo (8220) Possibility of mounting the pushrods in a naturally aspirated engine (R5 Alpine) by adjusting the pushrod...

Reference: 5052

€17.00 (tax incl.)

In stock

long exhaust push rod - 1

long exhaust push rod - 1

Original "Exhaust" rocker rod (Length 204.5mm Ø 6.5mm) - R5 Alpine (R1223) - Ref 7700621693

Sold individually

Reference: 5034

€14.00 (tax incl.)

Out of stock

Long push rod "Exhaust" (Length 205.5mm Ø 6.3mm) - 1

Long push rod "Exhaust" (Length 205.5mm Ø 6.3mm) - 1

"Exhaust" rocker rod (Length 205.5mm Ø 6.5mm) - R5 Alpine (Prepared Engine) / R5 Alpine Turbo - Ref 6001000493

Suitable for: R5 Alpine Atmo (1223) with prepared camshaft and engine R5 Alpine Turbo (122B) R5 Turbo (8220) Possibility of mounting the pushrods in a naturally aspirated engine (R5 Alpine) by adjusting the pushrod...

Reference: 5053

€17.00 (tax incl.)

In stock

Camshaft tappet Ø19mm - R5A (1223) / R5A Turbo (122B) / Turbo 2 (8220) - ref 7700658371 / 6001002128 - 1

Camshaft tappet Ø19mm - R5A (1223) / R5A Turbo (122B) / Turbo 2 (8220) - ref 7700658371 / 6001002128 - 1

Camshaft tappet Ø 19mm (Superior quality) - R5A (1223) / R5A Turbo (122B) / Turbo 2 (8220) - Ref 7700618536

Heat treatment 60 HRC on 1mm depth Ref OE Renault : 7700618536 / 7700658371 / 6001002128

Reference: 5035

€26.00 (tax incl.)

In stock

Screw with rocker arm adjustment nut - 1

Screw with rocker arm adjustment nut - 1

Rocker arm pushrod screw with adjusting nut

Screw diameter: M8x100 Overall length: 28.35mm Threaded length: 19mm Supplied with locking nut

Reference: 5036

€11.00 (tax incl.)

In stock

Cylinder head bolt M10 - R5 Alpine (1223) / R5 Alpine Turbo (122B) - ref 7700618680 - 1

Cylinder head bolt M10 - R5 Alpine (1223) / R5 Alpine Turbo (122B) - ref 7700618680 - 1

Cylinder head bolt M10 - R5 Alpine (1223) / R5 Alpine Turbo (122B) - ref 7700618680

Length under head : 160mm Need x10 bolt for one engine

Reference: 5037

€20.00 (tax incl.)

In stock

Washer under cylinder head screw M10x2.2mm thick - Engine 1400 / R5 Alpine (1223) - Ref 7703053294 - 1

Washer under cylinder head screw M10x2.2mm thick - Engine 1400 / R5 Alpine (1223) - Ref 7703053294 - 1

Washer under cylinder head screw M10x2.2mm thick - Engine 1400 / R5 Alpine (1223) - Ref 7703053294

Reference: 5095

€4.20 (tax incl.)

In stock

Set of 4 camshaft rings (x2 outer Ø 41.44mm - x1 Ø 41mm - x1 Ø38mm) + Ring AVP5027 (x1) - 1

Set of 4 camshaft rings (x2 outer Ø 41.44mm - x1 Ø 41mm - x1 Ø38mm) + Ring AVP5027 (x1) - 1

Set of 4 camshaft rings (x2 outer Ø 41.44mm - x1 Ø 41mm - x1 Ø38mm) + AVP5027 ring (x1)

The lubrication hole must be drilled after installation in the block.

Reference: 5031

€158.00 (tax incl.)

In stock

Camshaft ring - Ø 34.5mm (inner) x Ø 38mm (outer) - 1

Camshaft ring - Ø 34.5mm (inner) x Ø 38mm (outer) - 1

Bronze camshaft ring - Ø 34.5mm (Inner) x Ø 38mm (Outer) - Ref 7700512850 / 7705010014

Suitable for: R5 Alpine (1223) R5 Alpine Turbo (122B)

Reference: 5027

€38.00 (tax incl.)

In stock

Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200 - 1

Camshaft stop plate (1108cc / 1300cc / 1400cc engine) - Ref 7700525087 / 0607631800 / 0607378200 - 1

Camshaft stop plate (1108cm³ / 1300cm³ / 1400cm³ engine) - Ref 7700525087 / 0607631800 / 0607378200

Compatible avec : R8G R1134 (Moteur 1108cm³ - Type 804) / R1135 (Moteur 1255cm³ et 1296cm³ - Type 812) Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S R5 Turbo 1 et 2 (1397cm³) / R5 Alpine Turbo / R5 Alpine...

Reference: 5009

€14.00 (tax incl.)

In stock

Complete set of engine gaskets - R5 Alpine (1223) and Alpine turbo (122B) - 1

Complete set of engine gaskets - R5 Alpine (1223) and Alpine turbo (122B) - 1

Complete set of engine gaskets - R5 Alpine (1223) and Alpine turbo (122B)

Thickness: 1.60mm

Reference: 5010

€89.00 (tax incl.)

In stock

Engine seal running-in kit - R5 Alpine (1223) / R5 Alpine Turbo (122B) - 1

Engine seal running-in kit - R5 Alpine (1223) / R5 Alpine Turbo (122B) - 1

Engine seal running-in kit - R5 Alpine (1223) / R5 Alpine Turbo (122B)

Reference: 5003

€66.00 (tax incl.)

In stock

Cylinder head gasket - Thickness: 1.60mm - 1

Cylinder head gasket - Thickness: 1.60mm - 1

Cylinder head gasket - Thickness: 1.60mm

Reference: 5011

€28.00 (tax incl.)

In stock

Cork rocker cover gasket

Cork rocker cover gasket

Cork rocker cover gasket

Reference: 5015

€5.00 (tax incl.)

In stock

Cardboard rocker cover gasket

Cardboard rocker cover gasket

Cardboard rocker cover gasket

Reference: 5016

€9.00 (tax incl.)

In stock

U-shaped rocker cover rubber gasket (Superior Quality)

U-shaped rocker cover rubber gasket (Superior Quality)

U-shaped rocker cover rubber gasket (Superior Quality)

Rubber seal made from materials with mechanical properties specific to this application. Suitable for: R5 Alpine (R1223) and Alpine Turbo (R122B) R5 Turbo (R8220)

Reference: 5018

€24.00 (tax incl.)

In stock

Cylinder head gasket - R5 Alpine Atmo (1223) / R5 Alpine turbo (122B) - ref 7704000274 - 1

Cylinder head gasket - R5 Alpine Atmo (1223) / R5 Alpine turbo (122B) - ref 7704000274 - 1

Cylinder head gasket - Ref 7704000274

Reference: 5005

€4.00 (tax incl.)

In stock

Steel cylinder head inspection plate (1108cm³ and 1397cm³ engines) - Ref 7700564504 - 1

Steel cylinder head inspection plate (1108cm³ and 1397cm³ engines) - Ref 7700564504 - 1

Steel cylinder head inspection plate (1108cm³ and 1397cm³ engines) - Ref 7700564504

Reference: 5087

€9.00 (tax incl.)

In stock

Engine oil pan cork seal - large bearing - 1

Engine oil pan cork seal - large bearing - 1

Engine oil pan cork seal - large bearing

Reference: 4065

€10.00 (tax incl.)

In stock

Engine Oil Pan Cardboard Gasket (Large Bearing) - 1

Engine Oil Pan Cardboard Gasket (Large Bearing) - 1

Engine Oil Pan Cardboard Gasket (Large Bearing)

Cardboard seal, thickness: 1.3 mm

Reference: 5096

€22.00 (tax incl.)

In stock

One-piece oil sump gasket - Cléon engine (Large bearing) - 1

One-piece oil sump gasket - Cléon engine (Large bearing) - 1

One-piece oil sump gasket - Cléon engine (Large bearing)

Material: all rubber

Reference: 5094

€26.50 (tax incl.)

In stock

Rocker cover fixing gasket (3 pieces) - 1

Rocker cover fixing gasket (3 pieces) - 1

Rocker cover mounting gasket (3 pieces)

Reference: 5092

€3.50 (tax incl.)

In stock

Cylinder head spark plug well gasket - R5 A - 1

Cylinder head spark plug well gasket - R5 A - 1

Cylinder head spark plug well gasket - R5 A

Reference: 5038

€2.00 (tax incl.)

In stock

Spark plug well cup - 1400cc - 1

Spark plug well cup - 1400cc - 1

Spark plug well cup - (Engine 1400cm³)

Reference: 5032

€9.00 (tax incl.)

In stock

Manifold / cylinder head gasket - R5 A (1223) / R5 A turbo (122B) - 1

Manifold / cylinder head gasket - R5 A (1223) / R5 A turbo (122B) - 1

Manifold / cylinder head gasket - R5 Alpine (1223) / R5 Alpine turbo (122B)

Reference: 40106

€10.00 (tax incl.)

In stock

Intake manifold gasket - Engine 1397cc

Intake manifold gasket - Engine 1397cc

Intake manifold gasket - Engine 1397cc

Reference: 5041

€5.50 (tax incl.)

In stock

Gasket between manifold and exhaust pipe - R5 Alpine (R1223) - Ref 7701020148

Gasket between manifold and exhaust pipe - R5 Alpine (R1223) - Ref 7701020148

Gasket between manifold and exhaust pipe - R5 Alpine (R1223) - Ref 7701020148

Mounting center distance: 67mm Mounting hole diameter: Ø 11mm Crimping diameter: Ø 42mm OE Renault Ref: 7701020148 / 7701023607 Two gaskets required - Sold individually

Reference: 5042

€6.00 (tax incl.)

In stock

Cork timing cover gasket

Cork timing cover gasket

Cork timing cover gasket

Reference: 4018

€4.50 (tax incl.)

In stock

Double timing kit with chain and x2 sprockets (crankshaft and camshaft) - 1

Double timing kit with chain and x2 sprockets (crankshaft and camshaft) - 1

Double distribution kit with chain and x2 sprockets (Crankshaft x17 teeth and camshaft x34 teeth)

Suitable for: R5 Alpine (R1223) and R5 Alpine Turbo (R122B) Double Chain: 58 Links ( OE Renault Ref 7701348715 ) Crankshaft Sprocket: 17 Teeth ( OE Renault Ref 7700590313 ) Camshaft Sprocket: 34 Teeth ( OE Renault...

Reference: 5049

Double distribution chain - 58 links (Superior quality) - 1

Double distribution chain - 58 links (Superior quality) - 1

Double distribution chain - 58 links (Superior quality) - Ref 7701348715

OE Renault Ref: 7700611453 / 7701348715

Reference: 5045

€38.00 (tax incl.)

In stock

Double chain tensioner - 1

Double chain tensioner - 1

Hydraulic timing chain tensioner with automatic winding for double chain (Superior Quality)

Tendeur à armement automatique par ressort Présence d'un orifice de graissage pour assurer la lubrification et le maintien en tension du patin contre la chaîne

Reference: 6063

€72.00 (tax incl.)

In stock

Camshaft oil seal - 30x42x8 - 1

Camshaft oil seal - 30x42x8 - 1

Camshaft oil seal - 30x42x8

Reference: 5043

€9.50 (tax incl.)

In stock

Timing side oil seal - 35x50x8 - 1

Timing side oil seal - 35x50x8 - 1

Timing side oil seal - 35x50x8

Reference: 4022

€9.50 (tax incl.)

In stock

Flywheel side oil seal - 80x100x13 (large bearing) - 1

Flywheel side oil seal - 80x100x13 (large bearing) - 1

Flywheel side oil seal - 80x100x13 (large bearing)

Reference: 6066

€18.00 (tax incl.)

In stock

Spark plug NGK - R5A (1223) / A310.6 - 1

Spark plug NGK - R5A (1223) / A310.6 - 1

Spark plug "NGK BP6EFS" - Normal use

Suitable for the following vehicles: R5 Alpine Atmo (R1223) R14: From 06/1983 R18 GTX: From 02/1986 R20 LS / TS / TX: From 12/1983 R21 (J6R): From 03/1986 to 12/1995 R25 (J6R - 706 / 707 / 762 / 763): From 01/1984 to...

Reference: 5723

€5.00 (tax incl.)

In stock

Ducellier 525029 or 525028 lighter with vacuum capsule - 2

Ducellier 525029 or 525028 lighter with vacuum capsule - 2

Ducellier 525028 or 525029 igniter (R230 curve) with vacuum capsule - R5 Alpine (R1223)

External breaker adjustment

Reference: 5701

€332.00 (tax incl.)

Out of stock

Igniter Ducellier 525028 or 525029 with vacuum and integrated electronic ignition kit - 1

Igniter Ducellier 525028 or 525029 with vacuum and integrated electronic ignition kit - 1

Ducellier 525028 or 525029 igniter (R230 curve) with vacuum and integrated 12V electronic ignition kit

This igniter is suitable for: R5 Alpine (R1223) Igniter to be used with a coil with a primary resistance of 2.5 to 3.5 ohms Compatible with coils AVP4708 and AVP4715 Instructions included

Reference: 5731

€396.00 (tax incl.)

Out of stock

Water pump - R4 / R5A (1223) and R5AT (122B) - 1

Water pump - R4 / R5A (1223) and R5AT (122B) - 1

Water pump - R4 / R5A (1223) and R5AT (122B)

sold with its plate and seals

Reference: 5208

€64.00 (tax incl.)

In stock

Gasket between water pump and plate - 1

Gasket between water pump and plate - 1

Gasket between water pump and plate

Renault 4 Renault R5 / R5 alpine (1223) / R5 alpine turbo (122B)

Reference: 5221

€4.20 (tax incl.)

In stock

Gasket between water pump plate and cylinder head

Gasket between water pump plate and cylinder head

Gasket between water pump plate and cylinder head

Reference: 5044

€2.50 (tax incl.)

In stock

Water pump belt - R5 A (1223) / R5 AT (122B) - 1

Water pump belt - R5 A (1223) / R5 AT (122B) - 1

Water pump belt 10x675 - R5 Alpine (1223) / R5 Alpine Turbo (122B)

R4 (Billancourt Engine): Alternator belt - Ref 0854249800 R5 Alpine (1223) / R5 alpine Turbo (122B): Water pump belt

Reference: 5047

€10.00 (tax incl.)

In stock

Showing 1-72 of 134 item(s)

1

Left column

Top

Please sign in first.

Sign in