Steel cylinder head inspection plate (1108cm³ and 1397cm³ engines) - Ref 7700564504
Reference:
5087
€9.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Rubber seal made from materials with mechanical properties specific to this application.
Suitable for:
- R5 Alpine (R1223) and Alpine Turbo (R122B)
- R5 Turbo (R8220)
In stock
Customers who bought this product also bought:
 - Ref 7700564504&media=https://www.arnaudventouxpieces.com/10490-large_default/plaque-en-acier-de-visite-culasse-moteur-1108cm-et-1397cm-ref-7700564504.jpg){kind=link}
In stock
- Single chain: x58 links
- Crankshaft sprocket x17 teeth and camshaft sprocket x34 teeth
- Oil seal: Ø 35x50x8mm
- Timing cover gasket: Cork and rubber
In stock
Blue silicone ignition harness with 90° angled terminals (long extensions integrated into the wires)
- This ignition harness consists of 4 spark plug wires and one coil wire.
- Terminals on coil 90° angled
- Length of coil cable: 61cm
- Length of 2 spark plug wires: 26.5cm
- Length of 2 spark plug wires: 36.5cm
- We would like to point out that our spark plug harnesses are manufactured with 7mm diameter silicone wires, in black or red, with a standard copper core, which indicates that they do not have interference protection.
- If the car is equipped with sensitive electronic accessories, such as radios, Trip Master, Monitors, or certain electronic ignition kits, some interference or disruption may be observed.
In stock
- This kit contains an M9 adjustment screw nut and an M8 nut
- To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
- A square symbol indicates a square seal, while a circle symbol indicates a round seal.
- It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
- We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
- It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.
Out of stock
Out of stock
In stock
- This kit contains an M9 adjustment screw nut and an M8 nut.
- To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
- The "square" symbol indicates the presence of a square seal, while the circle symbol indicates the presence of a round seal.
- It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
- We recommend that you Check the symbol displayed on each caliper, as a vehicle may have calipers of different origins, some with square joints and others with round joints.
- It is not recommended to mix calipers on the same assembly, as this can lead to the risk of skewing during braking.
In stock