In stock
R4 / 4L braking
Our braking spare parts for the Renault 4L
Discover here a wide choice of parts to restore and ensure the proper functioning of the braking system of your Renault 4L
Whether you are looking for wheel cylinders, hoses, master cylinders, brake discs, original brake calipers, big brake calipers, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old one back to life with quality components.
In stock
Piston depth 7mm
In stock
- For long master cylinder push rod
- Piston depth 38mm
In stock
For long push rod, piston depth 38mm
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Fitting: Ø 7/16" - 20UNF (Ø 11.11mm x 125)
For original master cylinders Ø 19mm, Ø 22mm and Kangoo mounting
In stock
Male / female connection: 3/8" - 24UNF
In stock
In stock
Female/female connection: 3/8" - 24 UNF
In stock
Front hose length: 505mm
Rear hose length: 270mm
In stock
3 x Fittings: Ø 3/8"-24UNF (Ø 9.52mm)
2 x Mounting Holes
Suitable for:
R4 / 4L: From 1968 to 1976
R5 TL / R5 TS
R16 TS
Out of stock
Out of stock
In stock
In stock
In stock
In stock
R1123 - 0.8 - 19 kw from 01/81 to 12/82 R1123 - 0.8 - 25 kw from 09/72 to 08/86 R1128 s 128 - 1.1 - 25kw from 06/78 to 07/82 R2106 - 08 25 kw from 09/66 to 12/88 R2370 - 210 B 25 kw from 10/76 to 07/82
Out of stock
0.7 - 15kw from 04/62 to 04/71 0.8 - 20kw from 01/81 to 09/82 1.1 - 33kw from 02/78 to 03/84 R1123 - 0.8 - 25kw from 09/71 to 12/88 R1123 0.8 - 19 kw from 10/62 to 09/83 R1123 0.8 - 21 kw from 10/83 to 10/88 R2106 0.8...
Out of stock
Out of stock
In stock
Suitable for:
R4 / 4L: Front Brake
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R8: Big Brake Installation: Front Brake
R12 (All models): Front Brake
R15 / R16 / R17 (All models): Front Brake
A110: Big...
In stock
Suitable for:
R4 Saloon / F4 & F6 Van / Rodeo: Front Disc
R5 Alpine (1223): Front Disc
R5 Alpine Turbo (122B) / Alpine Coupe / GR2: Rear Disc
R12 / R15TL: Front Disc
R12G / R17G / R17TS: Rear Disc
In stock
Sold complete with teat (inside Ø 6mm), insert, support and cap.
In stock
- Sold complete with support, brass cap, insert and rubber teat
- Jar mounted with rubber teat Ø 6mm
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
Sold in 1ml lengths
In stock
In stock
For securing brake or fuel pipes, hoses, or lines
Out of stock
In stock
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
In stock
TRW paste is used for the repair, assembly and conservation of hydraulic brake elements, particularly brake calipers which must be reassembled using special greases.
Compatible with all brake fluids for mounting the...
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock