Right or Left Rear Wheel Cylinder Ø 22mm - R4 / R5 Alpine (1223) - Bendix Assembly

• Knob covered in high-quality faux leather
• White and blue aluminum insert (identical to the original)
• Screw-on gear knob: M12 mounting

• Suitable for copper tube Ø 3.5x6.35mm

Wheel cylinder specifications:

• Inner diameter: Ø 23.8 mm
• Mounting screw diameter: M6 (2 holes)
• Mounting hole spacing: 25 mm
• Wheel cylinder body width (overall): 72 mm
• Hose connection diameter: Ø 3/8 - 24 UNF
• Hose connection positioned at an angle relative to the bleed screw
• Sold individually.

• Female connector: Ø 3/8"-24UNF (Ø 9.52mm) x3

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Thread Ø3/4" - 16UNF

4L: Box / 354 / HAO-146 / HAO-163 / HAO-191

R5: Box 385 / NG5