Suitable for:
R4 (R1120): From start to chassis no. 468774
R4 (R1123): From start to chassis no. 212514
Renault OE Ref: 0996027700 (Left) + 0996027600 (Right)
Steering Ball Joint Pin : M10
In stock
Steering & front axle R4 / 4L
Our spare parts for the steering and front axle of your Renault 4L
Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Renault 4L
Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, silentbloc, stabilizer bar, support, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, stud, shock absorber, spring...at AVP, Arnaud Ventoux Pièces, you will find everything you need to give your old car a new lease of life with quality components.
Suitable for:
R4 (R1120): From chassis no. 468775 to no. 954000
R4 (R1123): From chassis no. 212515 to no. 627131
R4 F5 (R2106): From the beginning to chassis no. 24876
Renault OE Ref: 7701450479 (Left) + 7701450480...
In stock
Pair of Right and Left Steering Tie Rods - R4 (Third Models - From 1969 to 1978) / R5 (First Models)
Suitable for:
R4 (R1120): From chassis no. 954001 to the end
R4 (R1123): From chassis n°627132 to n°2012576
R4 (R1126): From the beginning to chassis no. 655996
R4 (R1128): From the beginning to chassis no. 60549
R4...
In stock
In stock
Cone diameter: Top of cone Ø11.5mm / Bottom of cone Ø 13mm
Cone axis: M10x125
Ball joint / tie rod axis: M14x150 (Right hand thread)
In stock
In stock
Diameter on the rack side: M12x100 (Right hand thread)
Diameter on the steering ball side: M14x150 (Right hand thread)
In stock
Suitable for:
Eye end cap of rack and pinion - Ref 0824373600 / 7700504987
Front tie rod end cap or rear tie rod end cap - A110 - Ref 7700504987
Exhaust hanger - A310 V6 - Ref 7700504987
Inner diameter of the eye: Ø...
In stock
In stock
In stock
In stock
In stock
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Suitable for:
R4 (R1120) from start to No. 954000
R4 (R1123) from start to No. 627131
R4 (R2106) from start to #24876
In stock
Suitable for:
R4 (R1120) from start to No. 954000
R4 (R1123) from start to No. 627131
R4 (R2106) from start to #24876
In stock
Suspension ball joints: M12x125 axle - Cone Ø 12.50mm to Ø 14mm
Mounting center distance on the wishbone: 42mm and 51mm
OE Renault Ref: 7701450637 / 7701461162
In stock
Suspension ball joints: M12x125 axle - Cone Ø 12.50mm to Ø 14mm
Mounting center distance on the wishbone: 42mm and 51mm
Renault OE Ref: 7701450635 / 7701461161
In stock
Suspension ball joints: M10x125 axle - Cone Ø 10.80mm to Ø 12.50mm
Mounting center distance on the wishbone: 40mm and 46mm
Ball joint mounting diameter: 30.4mm
OE Renault part number: 0981728300 / 0981711500...
In stock
Ball joint: M10x125 axle - Cone Ø 11.30mm to Ø 13mm
Mounting center distance on the wishbone: 42mm and 48mm
Ball joint mounting diameter: 32.5mm
Renault OE Ref: 0996064400
Suitable for:
R4 (R1120): From No. 468775...
In stock
Rotules de suspension: Axe M10x125 - Cône Ø 11.50mm à Ø 13mm
Entraxe de fixation sur le triangle : 42mm et 47.5mm
Réf OE Renault : 7701451904
In stock
Not suitable for replacing the original ball joint bellows
In stock
Complete wishbone with ball joint and silentbloc (x2)
Wishbone equipped with suspension ball joints (AVP 5309): M10x125 axle - Cone Ø 11.50mm to Ø 13mm
Suitable for R4 / 4L: From 1969 to end of series
In stock
Complete wishbone with ball joint and silentbloc (x2)
Wishbone equipped with suspension ball joints (AVP 5309): M10x125 axle - Cone Ø 11.50mm to Ø 13mm
Suitable for R4 / 4L: From 1969 to end of series
In stock
In stock
Rubber bush hardness: 75 Shores
OE Renault Ref: 0854588600 / 0855842600 / 7701348454
Suitable for:
R4 / 4L (All models): Lower control arm bush
R5 (All models): Rear lower wishbone bush
In stock
Spacer inner diameter 10mm
Inner diameter of the rubber 9mm
In stock
Spacer inner diameter 10mm
Inner diameter of the rubber 12mm
In stock
Inner diameter of the spacer 12mm
Inner diameter of the rubber 12mm
In stock
In stock
Sold individually
OE Renault Ref: 0428245200 / 7702144008
In stock
The kit contains:
2 bearings Ø 30x62x16mm
1 transmission nut M16x150
Suitable for:
R4: All models
R5: (From 1972 to 1985 - EXCEPT Alpine and Alpine Turbo)
R6
OE Renault Ref: 7701460637 / 7701461046 / 7703090270 /...
In stock
Suitable for the following vehicles:
R4 / 4L: Type R1120: from chassis 954001: from 10/1968
R4 / 4L: Type R1123: from chassis 627132: from 07/1968
R4 / 4L: Type R1126: from 1971
R4 / 4L: Safari: from 1971
R4 / 4L:...
In stock
Suitable for the following vehicles:
R5 Alpine / R5 Alpine Turbo: from 1976 -> 1985
Suitable for the following vehicles for the 4L TROPHY: (in addition to AVP Part Number 4L-320)
R4 / 4L: Type R1120: from...
In stock
Suitable for the following vehicles:
R4 / 4L: Type R1120: from chassis 954001: from 10/1968
R4 / 4L: Type R1123: from chassis 627132: from 07/1968
R4 / 4L: Type R1126: from 1971
R4 / 4L: Safari: from 1971
R4 / 4L:...
In stock
In stock
4L: R1123 / R1126 / R1129 / R2106 / R2391 / R2392 from 1976 to 1982
4L: R1123 / R2106 / R 2391 after 1983
In stock
4L: R1123/ R1125 / R1129 / R2106 / R2391 / R2392 from 1976 to 1982
4L: R1123 / R 2106 / R2391 after 1983
In stock
4L: R1128 / R2370 / R2430 from 1976 to 1982
4L: R1128 / R112C / R 210B / R210B / R2370 / R 239B / S128 after 1983
R5
In stock
4L: R1128 / R2370 / R2430 from 1976 to 1982
4L: R1128 / R112C / R210B / R239B / R2370 / S128 after 1983
R5
In stock
In stock
In stock
In stock
In stock
In stock
Dimensions: 5.5"x13 - ET offset: 25mm
Mounting center distance: 3x115
Diameter of the circle between the studs: Ø 3x130
Color: black and varnished aluminum
60° wheel nut cone (wheel nut not supplied with the rim)...
Out of stock
For original rim with fin "Turbine" and rim "Bobine"
In stock
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock