Bodywork & Exterior Accessories Alpine A310 V6
Our spare parts and accessories for the exterior of your Alpine A310 V6
Discover here a wide choice of spare parts to embellish the exterior of your Alpine A310 V6
Whether you are looking for a bonnet seal, bonnet hinge, barrel seal, aluminium profile, windscreen washer, windscreen washer jet and fittings, pair of rear lights and seal, long range, Alpine wheel centre...at AVP, Arnaud Ventoux Pièces, you will find everything you need to give new life and enhance the value of your old car with quality components.
Lift Features:
Double-acting gas lift
Mounting center distance: 305mm
Lift stroke: 120mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 595mm
Lift stroke: 250mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 600mm
Lift stroke: 250mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock
In stock
Suitable for:
R5 All models (1st Version)
R12 / R15 / R16 / R17
A110 V85 / A110.1600cm³ (SI / SX / SC)
A310.4
A310 V6 (Before 1981)
Gasket dimensions:
Inner diameter: Ø 20mm
Outer diameter: Ø 33mm
Height (excluding...
In stock
Seal Dimensions:
Inner Diameter: Ø 22mm
Outer Diameter: Ø 32.8mm
Height (excluding lugs): 6.2mm
Recessed Diameter: Ø 26.5mm
Push Button Diameter: Ø 21.5mm
In stock
Very malleable aluminium, bends easily.
In stock
In stock
In stock
In stock
In stock
Delivery in France only
Using the measuring cap, simply mix the concentrated windshield washer fluid directly with water.
250ml bottle = 25 liters of windshield washer fluid
In stock
In stock
In stock
6mm-thick clear glass, laminated with double curvature and R43 approved
Original white enamel screen printing for the vertical lines (omitting the Cibié logo)
Identical to the original "Cibié" headlight lenses
In stock
6mm thick clear glass, laminated with double curvature and R43 approved
Original white enamel screen printing for the vertical lines (omitting the Cibié logo)
Identical to the original "Cibié" headlight lenses
In stock
Sold individually
12V-55W H3 bulb supplied
In stock
In stock
In stock
For original "Turbine" finned and full "Bobine" rims
Ø recess : Ø 68mm
In stock
Black polyurethane adhesive for rubber seals
High adhesion, temperature resistant up to 90°
In stock
Transforms rust into a stable, black layer
Essential for inaccessible bodywork corners
Apply neat and with a brush to all rusty surfaces
In stock
Delivery in France only
Product for stripping most varnishes and paints such as polyurethane, epoxy, glycerophthalic, cellulose, etc.
In stock
Textured paint is a two-component, structured coating based on organic wax.
This high-performance texturizing agent provides optimal resistance to abrasion and rubbing and increases film hardness.
Once the hardener...
In stock