Out of stock
Alpine A310 V6 braking system - After 1980
For mounting with banjo screws fixing on front and rear bracket M10x100 (x4)
In stock
In stock
In stock
Bleeder screw specifications:
Thread diameter: M7 - 1.00 pitch
Overall length: 26.3 mm
Length under head: 15.5 mm
Thread length: 10 mm
Wrench size: 8
Sold individually
In stock
Suitable for:
R5 Turbo 1 and 2 (8220)
A310 V6 - After 1980(From #47709 to the end of the series)
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502): Rear brake caliper
Kit contents:
Spring clips: x4
Retaining...
In stock
Suitable for:
A310.6: Front and rear disc - After 1980 (n°47709 at the end of the series)
R5 Turbo: Front and rear disc
In stock
Suitable for the following vehicles:
Alpine A310 V6 (Post-1980): Front or Rear Brakes
R5 Turbo: Front or Rear Brakes
In stock
Suitable for the following vehicles:
Alpine A310 V6 (Post-1980): Front or Rear Brakes
R5 Turbo: Front or Rear Brakes
Pad dimensions:
Width: 105.2mm
Height: 65.2mm
Thickness: 18mm
For competition use only; do not...
In stock
In stock
In stock
In stock
In stock
This kit consists of the following copper pipes:
From the brake master cylinder to the front right wheel
From the brake master cylinder to the front brake proportioning valve (3/8"-24UNF fitting)
From the brake...
In stock
In stock
Brake hose made of nickel-plated copper:
More corrosion-resistant than copper alone.
Increased lifespan thanks to the nickel plating.
Out of stock
Double-walled steel brake line coated with a PVF coating:
Tube made of steel coated with a polyfluoroethylene coating for high resistance to rust and corrosion.
Hose used as original equipment by many automotive...
In stock
Thread diameter: Ø 3/8" - 24UNF (+/- 9.52mm)
Nut inner diameter: Ø 5.10mm
Overall length: 19mm
Length under head: 14mm
Cone: Concave / Female
Renault / Alpine OE part number: 6035324 / 0603532400 / 7700523490
Out of stock
In stock
In stock
Out of stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
TRW paste is used for the repair, assembly, and preservation of hydraulic brake components—such as brake calipers—that require special greases for reassembly.
Compatible with all brake fluids for the installation of...
In stock
Ideal for degreasing all your brake components or other mechanical parts.
Image for illustrative purposes only.
May vary depending on availability.
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
UNC - UNF Standard: Threads from 24 to 11 threads (3/8-24 UNF, 7/16-20 UNF, 1/2 x 20 UNF....)
Tool for restoring internal and external threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock