Flexor Specifications:
Mounting hole spacing:4 x 50.50 mm
Mounting hole diameter: Ø 8.4 mm
Center hole diameter:Ø 10.50 mm
Flexor thickness: 11 mm
Material:Rubber flexor with metal reinforcement
Supplied with 4 x...
In stock
Steering and front axle of an A310 V6 - Pre-1980
The reinforced tie rod and ball joint kit (M14x150) replaces the original M12x100 tie rods and ball joints without any modification.
It is possible to install it on an A310.4 using the AVP7609 adapter to replace the...
In stock
Tie rod/ball joint thread: M14x150(Left-hand thread)
Tie rod sold individually
It is possible to install it on an A310.4 using the AVP7609 adapter to replace the original "fork"-type tie rods
The AVP7606 tie rod is...
In stock
Ball Joint Thread: M14x150 (Left-Hand Thread)
Ball Joint Thread: M14x125 (Right-Hand Thread)
Tie rod end sold individually
The AVP7344 tie rod end is not compatible with the original A310 V6 M12x100 mounting, but...
In stock
Suitable for:
R8 (All models) / Caravelle / Floride S: Left and Right Side Boot
A110 (All models) / Alpine GT4: Left and Right Side Boot
A310.4: Left and Right Side Boot
A310 V6: Left Side Boot
Matradjet: Left and...
In stock
In stock
In stock
Suitable for:
R12 Gordini
A310.4 / A310 V6 (From chassis no. 1 to no. 909)
In stock
In stock
Minimum adjustment 36.5cm (From fixing axis to the support of the 1st washer)
Out of stock
Suitable for vehicles:
R12
R15 / R17
A310.4: VF and VE (From chassis no. 910 to the end)
A310 V6
In stock
Length taken from the axis of the upper fixing bolt to the support of the 1st washer: 10.5cm
In stock
Dimension of the axis of the upper fixing bolt at the support of the 1st washer
In stock
Dimension of the axis of the upper fixing bolt at the support of the 1st washer 14cm
In stock
Dimension of the axis of the upper fixing bolt at the support of the 1st washer
In stock
Out of stock
In stock
In stock
Out of stock
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Suitable for:
A310.4: 1600VE (From serial number 1066 to the end of the series) and 1600VF (From serial number 21066 to the end of the series)
A310 V6: All models (Before and After 1980)
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock
In stock