"A" arrow rim center in chromed plastic

The entire kit is composed of 3/8"-24UNF and M10x100 fittings

This kit is composed of the following copper pipes:

- From the brake master cylinder to the Right Front Wheel

- From the brake master cylinder to the Left Front Wheel

- From the brake master cylinder to the rear distributor

- From the rear splitter to the right rear arm

- From the rear splitter to the rear left arm

-From the Right Rear arm to the Right Rear wheel

-From the Rear Left arm to the Rear Left wheel

• It is recommended to perform a dry fit of all body components to ensure proper alignment. Adjustments may be necessary.

Shipping available. Contact us to obtain a transport quote and find out our conditions.

• It is recommended to perform a dry fit of all body components to ensure proper alignment. Adjustments may be necessary.

Shipping available. Contact us to obtain a transport quote and find out our conditions.

Height: 25.5 cm

Length: 18.5 cm

• This ignition harness consists of 4 spark plug wires and 1 coil wire, each 7mm in diameter.
• It does not have interference suppression.

If the vehicle is equipped with sensitive electronic accessories, such as a radio, trip meter, monitor, or certain electronic ignition kits, interference or disruptions may occur.

• Coil wire length: 450mm
• Spark plug wire lengths: 350mm / 350mm / 350mm / 350mm

Ignition cables with copper core with interference suppression,

Copper is an excellent conductor However, it is very susceptible to corrosion. Therefore, the copper core of this type of cable harness is coated with tin. This tin layer protects the copper from oxidation.

The copper core is also coated with silicone rubber for increased durability and electrical insulation. The outer silicone rubber insulation can withstand temperatures up to 220°C and is also resistant to oil and gasoline splashes. Cables with a copper core do not have internal interference suppression.

Fan trigger temperature 82°C

Fan stop temperature 72°C

• Stem Length: 38mm
• Membrane Hole Spacing: 27mm
• Cup Diameter 1: Ø 8.20 mm
• Cup Diameter 2: Ø 10.20 mm