Out of stock
Alpine A310 V6 braking system - Pre-1980
For mounting with banjo screws fixing on bracket M10x100 (x2) and M10x125 (x2)
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
Out of stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Convient pour:
R8 / A110: Frein Arrière (Montage Type gros frein)
A310.4 (Tous modèles) : Frein Arrière
A310.6 (Avant 1980) : Frein Arrière
In stock
Suitable for:
R8 / A110 : Rear Brake (Big Brake Type Mounting)
A310.4 (All Models) : Rear Brake
A310 V6 (Before 1980) : Rear Brake
Out of stock
Suitable for:
R8 / A110: Rear Brake (Big Brake Mounting Type)
A310.4 (All Models): Rear Brake
A310.6 (Before 1980): Rear Brake
In stock
Key Length: 56mm
Key Width: 23.5mm
Suitable for:
R5 Alpine (Coupe and Group 2): Front Brakes
R12G / R17G: Front Brakes
A310.4: Front and Rear Brakes
A310 V6 Before 1980 (#1 to #47708): Front and Rear Brakes
In stock
Suitable for:
A310.4: Front disc for n°1 to n°909
A310.6: Front disc for n°1 to n°47708 (before 1980)
R5 Alpine Turbo (122B) / Alpine Coupe: Front disc
R12G / R17G: Front disc
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
Out of stock
Suitable for:
R4 / 4L: Front Brake
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R8: Big Brake Installation: Front Brake
R12 (All models): Front Brake
R15 / R16 / R17 (All models): Front Brake
A110: Big...
In stock
Suitable for:
R8 / A110: Front Big Brakes
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
A310.4: Front Brakes
A310 V6 (Pre-1980): Front Brakes
R12 (All models): Front Brakes
R15 / R16 / R17 (All...
In stock
Suitable for:
R5 / R18 / R21 / R25 / R30 / : Rear Brake
R8: Rear Big Brake Installation
R5 Alpine Turbo (122B): Rear Brake
R12G / R17G: Rear Brake
A110: Rear Big Brake Installation
A310.4: Rear Brake
A310 V6...
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310 V6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
Brake pads with a retaining stop (B in the diagram) must...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
This kit consists of the following copper pipes:
From the brake master cylinder to the front right wheel
From the brake master cylinder to the front brake proportioning valve (3/8"-24UNF fitting)
From the brake...
In stock
In stock
Brake hose made of nickel-plated copper:
More corrosion-resistant than copper alone.
Increased lifespan thanks to the nickel plating.
In stock
Double-walled steel brake line coated with a PVF coating:
Tube made of steel coated with a polyfluoroethylene coating for high resistance to rust and corrosion.
Hose used as original equipment by many automotive...
In stock
Thread diameter: Ø 3/8" - 24UNF (+/- 9.52mm)
Nut inner diameter: Ø 5.10mm
Overall length: 19mm
Length under head: 14mm
Cone: Concave / Female
Renault / Alpine OE part number: 6035324 / 0603532400 / 7700523490
Out of stock
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
TRW paste is used for the repair, assembly, and preservation of hydraulic brake components, particularly brake calipers, which must be reassembled using special greases.
Compatible with all brake fluids for...
In stock
Ideal for degreasing all your brake components or other mechanical parts.
Image for illustrative purposes only.
May vary depending on availability.
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock